Question about 1995 Volkswagen Golf

1 Answer

RE:CLUTCH PLATE I have a 1995 Golf 3 GSX my clutch plate have to be replaced.What clutch plate is the best and a product code of the clutch plate would help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 151 Answers

Factory one is fine enough, mine lasted over 175 000 miles.

Posted on Sep 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cluch operatng shaft leaver chage vw


are you refering to the clutch fork that connects to the other end of the clutch cable, you will have to drop the gear box as this fork sits over the clutch pressure plate ,and pushes the thrust bearing against the pressure plate tynes so disengages the drive from engine to gearbox, while you've got the box out check the condition of the clutch parts ie thrust bearing,pressure plate spring's,friction plate condition

Oct 01, 2014 | 2000 Volkswagen Golf

1 Answer

GEARBOX 1995 USUZU MU 3.1 DIESEL


If the clutch is not disengaging when you put your foot on the clutch ( if the system has been bled correctly or cable fitted correctly ) then the problem is that the clutch plate is in the wrong way round and the clutch hub with the springs is hitting on the flywheel bolts

Jan 10, 2014 | Isuzu Pickup Cars & Trucks

1 Answer

Clutch burning smell in queing traffic,whirring sound which stops when clutch depressed, rattley gear stick,harder to engage gears,this has happened over the last 2000 miles.


clutch release bearing/pressure plate going fast,you need to replace asap or be stuck...change all 3 components at same time,

May 25, 2010 | 2002 Volkswagen Golf

1 Answer

5 speed hard time shifting and it has a new clutch.


Replacing the clutch plate only sometimes doesn't help you should have replaced the clutch pressure plate too, best is to fit the clutch pro-kit (clutch plate, clutch pressure plate and release bearing).
I guess now you will have to just replace the clutch pressure plate and the release bearing.

Nov 23, 2009 | 2000 Kia Sportage

1 Answer

It only slips on occasion, one day you can drive no problem with out it slipping, the next day it does it all day...


If its a manual.....thn its time for clutch plate change, best is to replace the pro-kit....clutch pressure plate,clutch plate and release bearing.

Oct 24, 2009 | 1995 Ford Probe

2 Answers

Clutch on my golf gti turbo


it is the clutch.
theres nothing else you can do but replace the clutch.
as to the kind of clutch i would use original equipment to replace with.
be very carefull with after market stores.
there are better parts you can use but you must look into other clutchs that have been used and decide for yourself which one is best for you.

just a thinker for you.
if it is a 2000 car and this is its first clutch original equip allready proves to go this long.
dont get a kit that will need to be done again in 10000 miles cause a racer says its an awesome kit.

labor on that is expected to be in the 290 350 range.
parts on this is about 360 490

pilot bearing
throwout bearing
clutch plate
clutch disc
have all four parts replaced
no questions asked if they cant do the job right then find someone else.
dont short yourself on this job cause you will kick yourself later.

Jun 12, 2009 | 2001 Volkswagen Golf

1 Answer

Golf 1 clutch keeps slipping


Yes, replace it. It wears out just like brake rotors do. If it is too thin the clutch will slip.

May 27, 2009 | 1986 Volkswagen Golf

1 Answer

Steps to changing a clutch plate on a 1986 VW golf


you need to take out the gearbox, and then you can find the clutch plate betveen the gearbox and the motor.

Apr 12, 2009 | 1986 Volkswagen Golf

1 Answer

Clutch repair 2005 VW Chico


You need to empty the engine from all fluids, tehn remove air filter and other parts, mount your Golf on a bridge and remove the clutch pressure plate assembly mounted on a side of the engine.

You will need special tools to align and mount the new pressure plate, and you will need to follow a procedure to reinstall the clutch without removing the transaxle.

Replacing the clutch is not an easy task for a beginner, if you do it yourself, get the haynes manual with the complete illustrated procedure.

After replacing you will have to adjust the clutch. See CLUTCH REPLACEMENT PROCEDURES.


Feb 17, 2009 | 1997 Volkswagen Golf

2 Answers

Noisey Clutch accelarating in 1st and 2nd gear


Sounds like its not sticking to the flywheel instantly but skippng a little bit and the squeek could be the clutch plate springs groaning.If the clutch and flywheel have been used hard it could have a heat glaze on it that resists grip Probably need to get flywheel machined when you eventualy change the clutch.

Oct 13, 2008 | 2000 Volkswagen Golf

Not finding what you are looking for?
1995 Volkswagen Golf Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...