Question about 2003 Ford Focus

1 Answer

Low mount stop lights not working on 2003 Ford Focus SE 4 Door Sedan, the high mount works fine, the light bulbs are fine the fuse is fine the polarity seem to be reversed for the brake lights as the ground is not grounded but is hot. How can i fix this problem my self? The emergency blinkers workl fine the turn signals too and the stop light switch is good.

Posted by on

1 Answer

Some of these cars have a problem with the wiring harness. Part of the harness runs into the hatch/rear door, and the moving back and forth when opening and closing it causes the harness to get damaged. I have heard rumors of a recall, but I don't know if it is true or not.

Posted on Aug 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does brake lamp bulb fault mean?


It means that one of the stop lights is not working. Check out the brake lights and replace the blown bulb. It may also mean that the brake fluid in the master cylinder reservoir is low and needs topping up.

Jul 31, 2014 | 2012 Ford Focus SE 4dr Hatchback 2.0L...

1 Answer

2002 Ford Focus high beams work low beams don t


un plug one of the light connectors and check for power and verify ground with a 12v test light tool (available for cheap at the part store.) if there is 12v present, and a ground when switched to low beam, remove the bulb, inspect the filament. you will likely find it just has two burnt light bulbs

May 04, 2014 | 2002 Ford SVT Focus

1 Answer

Both low beam headlights are out.


check for voltage at the high beam switch when high beams are turned on.

Oct 08, 2012 | 2004 Ford Focus

3 Answers

Low beam head lights not working - The low beams, both stopped working. The high beams work fine. I checked the fuses and all 4 are good. I even swapped the low and high beam fises just in case. No...


if the fuses are good then you need to check for power and ground at the headlight plug that attaches to the headlight bulb if you have a good power and ground there and the connections are good then the bulbs are both no good.or if you can tell the bulbs are burnt out by looking at them then you don`t have to check powers and grounds.you also can directly feed power and ground to the bulb and check both the terminals for high beam and low beam as you cannot tell which is which by looking at the terminals

Mar 04, 2011 | 2001 Ford Focus

2 Answers

What lamps takes ford focus 2001


This may help
Low Beam Headlight Bulb Size: 9003/HB2
High Beam Headlamp Light Bulb Size: 9003/HB2
Parking Light Bulb Size: 3157LL
Front Turn Signal Light Bulb Size: 3157LL
Rear Turn Signal Light Bulb Size: 3157LL
Tail Light Bulb Size: 3157LL
Stop Light Bulb Size: 3157LL
High Mount Stop Light Bulb Size: 2825
Fog/Driving Light Bulb Size: 899
License Plate Light Bulb Size: 6418
Back Up Light Bulb Size: 3156LL
Front Sidemarker Light Bulb Size: 194
Map Light Bulb Size: 3886X
Dome Light Bulb Size: 6411
google_protectAndRun("ads_core.google_render_ad", google_handleError, google_render_ad);

Apr 07, 2010 | 2001 Ford Focus

2 Answers

How do you replace the tail light in a 2003 Ford Focus ZTS sedan? not a hatchback


Open up hatch , reach in and pull back liner, Remove nuts to release light lens. then push, turn and pull out bulb socket and same for bulb.

Sep 23, 2009 | 2003 Ford Focus

3 Answers

Rear blinkers and brake lights on 2001 ford focus not working


yes it sounds like the turn signal switch is defective, the brake lights go through that switch as well.

Sep 06, 2009 | 2000 Ford Focus

1 Answer

Both 2003 oddyssey brake lights dont work High


clean bulbs socket out using the electronic spray cleaner for electrical connectors.

May 13, 2009 | 2003 Honda Odyssey

1 Answer

No brake lights.....


try the brake switch located behind the brake pedal itself

Jan 12, 2009 | 2003 Ford Focus

1 Answer

2004 ford focus headlights


You need to replace the high/low beam switch

Oct 27, 2008 | 2004 Ford Focus

Not finding what you are looking for?
2003 Ford Focus Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...