Window on the front right side of car doesn't raise due to the pully system not working, the motor works perfectly but the metalic wires that are used to raise and lower the widow bacame tangled and i need to replace them but i cant find the part anywhere.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have an 07 avalanche that did that to to the rear window. It was the switch. Take drivers side switch plate off and use one of the good switches on the drivers door. If it works roll it all the way to top and get urself a new switch. iIf it does not work then its the window motor. Good luck.............
Ok Could be one of 3 things...... 1. Bad switch. they're realively easy to replace. Cardone/HELP makes these switches and you can get them at any auto parts store. 2. Bad ground to the window motor. 3. Bad window motor.My best advise is goes the easiest, cheapest route. Replace the swithch first. That way if it solves the problem, you only have a couple of bucks into the repair, and you didn't change anything you really didn't need to get into. If it doesn't fix it, you still have a few bucks into it and a brad new switch in it that you don't have to worry about for a long while. IF you are not mechanically inclined with automotive elctrical systems, and the switch replacement didn't work, take to a reliable mechanic and have it checked for the bad ground first. Window motors can be pricey.
Probably a bad switch. Try removing the panel and with a 12 - 18 volt drill battery by your side, disconnect or cut the heavy gauge wires going to your motor. Use the drill battery to attempt to raise your window. reverse the connections if the window doesn't do anything. If it raises, reconnect your wires and tape them up and replace your switch
The problem is that you probably have pushe dhte rear window button thinking it wasthe front window button. Have you ever pushed the rear window button thinking it was the front and then push harder. Inside the switch ther are little plastic pins. Open the switch and turn the little pns around and you should e fine. you cna e-mail me if you like and I can tell youhow to fix it...firstname.lastname@example.org
before spending alot of money on windows motors, try to take out the switch in the door handle and spray contact cleaner in the switch.. sometimes if you use alot of armor all on the door panels it will work its way into the switch and make it dirty.
sounds like bad regulator, pull your door panel apart and it is the part that goes onto the motor. long bow shaped thing with cable attached. pop out rivets, (I think 3 rivets) and on the upper side there are 2 nuts that have to be removed. then wiggle it around till you can get it out of the biggest hole in door. Good Luck.