Question about 2001 Chevrolet Blazer

3 Answers

2000 chevy blazer, truck cranks and immediately dies. Have replaced computer, fuel pump, injectors, regulator, crank shaft sensor, oil pressure sensor, checked throttle position sensor, check ignition fire(good at all times) will start on fuel injector cleaner. need heeelp!

Posted by on

  • 7 more comments 
  • Anonymous Feb 20, 2009

    My mom's 2000 chevy blazer is currently in shop, have tried new computer, body control module, fuel filter and pump was replaced, and crank sensor also. The battery and fuses check out ok. The computer will not read out, we are over $1000 in so far, and the mechanic is dumbfounded. It has spark and fuel pressure, it will run for a short while if fuel is fed manually. Any ideas?

  • byron cutshall Dec 07, 2012

    no the battery stays charged

  • Anonymous Mar 12, 2014

    Does not want to start was driving it just die out not won't start

  • Anonymous Mar 17, 2014

    truck gets fire and we think fuel pump is good

  • Anonymous Mar 22, 2014

    I tried pour gas in the injectors but i still won't fire

  • Anonymous Mar 22, 2014

    replaced cam and crank sensors set timing and replaced computer

  • Anonymous Mar 22, 2014

    replaced crank and cam sensor set timing and replaced computer

  • Anonymous Mar 25, 2014

    can you help

  • Anonymous Mar 30, 2014

    no start after replacing starter

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Does your battery go dead?

Posted on Dec 18, 2008

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 73 Answers

Try throttle positioning sensor

Posted on Feb 24, 2009

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Check the fuel pressure regulator under the intake manafold im not shure on the number but it needs like 45psi or so for the motor to start......it is under the 1st piece the plastic intake manafold

Posted on Apr 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 Chevy Blazer I changed the fuel pump I have to crank on it a long I have to crank on it a long time before it will start. The I don't goes up and down it bogs down an it bogs down and dies....


It could be the fuel pressure regulator, but that can be determined by testing the actual fuel pressure in the fuel feeder rail. But first, have you changed the fuel filter? The fuel filter usually is clogged with debris whenever a fuel pump fails, so be sure to change that first.

Oct 28, 2014 | 1999 Chevrolet Blazer

1 Answer

Why my 97' f-250 7.3 powerr stroke keeps dieing while idling


The power stroke engine has several things that will cause this problem #1 crank shaft sensor AKA cam shaft sensor on crank shaft located on passenger side of engine near crank shaft pulley # 2 IPC sensor Injection pressure control if has oil in sensor replace it & wiring pigtail .#3 high pressure oil pump not up to par. #4 injection pressure regulator solenoid they get sticky. with a good scanner that has FORD enhanced software you can check all of these without leaving the drivers seat and perform running tests on injectors and test the ficm module interface with the pcm. Fuel Injection Control Module & Power Control Module.

May 02, 2014 | Cars & Trucks

1 Answer

My 94 Chevy cavalier keeps dying while I'm driving. fixed fuel pump, filter, fuel pressure regulator and crank shaft sensor I don't know what to do now


Any trouble codes stored in the computer ? Does it stop running at road speed, or at a stop, or both ?

Feb 10, 2014 | Cars & Trucks

1 Answer

My nubira will crank over but not start. It died while driving. i have replaced the spark plugs, crank angle sensor and the idle control sensor. it has had a second hand fuel pump not too long ago.


you shud scan car for any bad codes--are u gitten spark-test for that 1st-your coil or ignition module cud hav failed--what about fuel pressure-thats the 2nd test-the fuel pressure regulator or injectors may not be receiving a pulse

Dec 12, 2010 | 2000 Daewoo Nubira

2 Answers

I have a 1999 chevy blazer that died and will not start


Looks like you've covered the basics, make sure the firing order is correct with your spark plug wire replacement. Hope this diagram helps.
graphic.aspx?mod=reptiff&module_id=1&session_id=%7b5cc52220-8f88-4d0e-a430-d6f1cb46d743%7d&image_guid=95c27211&print_bw=0&

Mar 01, 2010 | 1999 Chevrolet Blazer

1 Answer

1994 chevy s10 fuel problem


If you having fuel flow problem, 1st check the fuel pump make sure is has a good pressure, 2nd check the crank sensors, 3rd common problems on 2.2l injectors which it has only one can be faulty or clog. 4th check fuel regulator, if the regulator is bad it wont keep the pressure build up and lock allowing the injector to work correctly. if your fuel pump is good, your crank sensor may also be going bad, what crank sensor does it it sense the flywheel turning and it send single to ECU (computer) telling it to turn on the pump and keep it running as long as the flywheel keep turning. If pump, crank sensor,regulator and injector are good, my next guess is to have your ECU bench tested. if you have to replace ECU, get it from the junk yard.

Sep 12, 2009 | 1994 Chevrolet S-10

3 Answers

The fuel pump pumps but on start up it dies


Flel regulator will only affect max fuel pressure only will not cause it to not start. try replacing fuel filter first if still does not get fuel then you need to see if it is fuel related or if you have a spark at the spark plugs, pull off a spark plug boot and put screw driver in it hold 1/4 inch away from bare metal and crank engine if you get a spark then it's fuel relateed if no fuel it can be the crank shaft sensor or the cam shaft sensor. let me know if it has fire.

Aug 30, 2009 | 1995 Ford F250

6 Answers

90 chevy 350 with TBI starts but wont stay running changed fuel filter and fuel regulator dont know what next


I have a 90 chevy k1500 350 tbi with same problem! I have traced problem to... after turning on key fuel pump kicks on when u crank it over injectors shoot gas and truck starts! After few seconds injectors stop spraying and truck dies! This can happen many times over and over! Eventually sometimes truck stays running and all is great! I changed ignition module, oil pressure sending unit (which i was told controls gas after vehicle is running) fuel filter, computer, fuel pump relay, I am at a loss now! Hope this helps and hope someone can help me!

Aug 10, 2009 | Chevrolet C1500 Cars & Trucks

2 Answers

2003 chevy malibu that cranks but won't run


If you haven't done so already, have the cam and crank shaft position sensors checked, or replaced, You have replaced everything else.

Jan 27, 2009 | 2003 Chevrolet Malibu

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

956 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...