Question about Chevrolet Cavalier
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Place the bike on a stand, disconnect the cable, remove the wheel, set the wheel brake side up, use the bolt slightly inserted in the drum, or two oposing screw drivers around the drum to pull it from the wheel. Once pulled, remove the springs and shoes,lightly sand the inner drum on the wheel, install new pads and springs, spray both drums with brake clean, reassemble drums and wheel, install the wheel, and then adjust cable tension and brake pressure at first the wheel, and then at the bars. Test and readjust as needed.
Posted on Jun 25, 2008
Well the biggest problems for the 98 and 99 cavaliers are that they mess up from the timing chain,..they make a rattling noise on the right side underneath the fender.
Posted on Jun 23, 2009
Drive it. Then have the rear abs brake sensors checked because they seem to be the first to go in a system like that. Someone with a scan tool should be able to read out any trouble codes in the abs system
Posted on Jul 08, 2009
The Intake Air Temperature (IAT) sensor determines the air temperature
inside the intake manifold. Resistance changes in response to the
ambient air temperature. The sensor has a negative temperature
coefficient. As the temperature of the sensor rises the resistance
across the sensor decreases. This provides a signal to the PCM
indicating the temperature of the incoming air charge. This sensor helps
the PCM to determine spark timing and air/fuel ratio. Information from
this sensor is added to the pressure sensor information to calculate the
air mass being sent to the cylinders. The IAT is a two wire sensor, a
5-volt reference signal is sent to the sensor and the signal return is
based upon the change in the measured resistance due to temperature.
Fig. 1: The IAT sensor is located in the air cleaner outlet tube-2.2L engine and 2.4L engine
Posted on Apr 11, 2010
Tips for a great answer:
Nov 11, 2015 | 1999 Chevrolet Cavalier
Aug 30, 2014 | 1999 Chevrolet Cavalier
Feb 02, 2014 | 1996 Chevrolet Cavalier
Aug 02, 2012 | 2000 Chevrolet Cavalier
Mar 18, 2012 | 1998 Chevrolet Cavalier
Jul 25, 2009 | 1999 Chevrolet Cavalier
Jul 08, 2009 | 1998 Chevrolet Cavalier
Apr 05, 2009 | 1999 Chevrolet Cavalier
Aug 02, 2008 | 1999 Chevrolet Cavalier
364 people viewed this question
Usually answered in minutes!