Question about 1996 Honda Civic

1 Answer

Wheel stud front wheel stud needs to be replaced

Posted by on

  • Anonymous Nov 01, 2008

    broken wheel stud

  • Anonymous Mar 11, 2009

    i need to change my front wheel

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

I have replaced one of mine, you have to buy a stud that has tapered serrations, remove the disc and hammer out the old and hammer in the new replacement.

Posted on Nov 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace front wheel studs on 2011 Kia Forte


If you can find just the studs and not have to buy the whole hub assembly, screw a lug nut on flush to the stud and drive it out with a hammer, make sure its in a position to have room on the back side. Put in new stud and with a few spacers tighten a lug nut to seat it.

Aug 15, 2014 | Cars & Trucks

1 Answer

Broken wheel studs on a 1987 jeep wrangler


No need to replace the hub just the studs. The come in from the back and are splined to prevent the stud from turning with the nut. Remove the hub --drive out the broken studs and put the new ones in from the rear and drive them back in. Get the studs from the dealer spares or a good tyre retailer.

Apr 08, 2013 | 1987 Jeep Wrangler

1 Answer

Change a front wheel stud on a freelander


You need to take the entire wheel assembly off. The wheel stud will need to be pressed out of the hub and a new one pressed in.

Oct 14, 2012 | Cars & Trucks

1 Answer

Front wheel stud replacement for a 2006 Hyundai Sonata GL.


grind a flat spot on the round head of the new stud this should give enough clearance to install it. don't pull the hub this will damage the bearing.

Oct 24, 2009 | 2006 Hyundai Sonata

3 Answers

Broken stud on wheel


The studs press out and in. Perhaps a hammer would work. Replacements studs can be purchased. Need to remove hub, of course.

Aug 13, 2009 | Hyundai Motor 2003 Elantra

1 Answer

Broke stud on front left side


Yes you can replace the broken wheel stud. The wheel studs are pressed into place, and a vise will work to press it out, and in. You will have to remove the wheel hub, and then use a deep well socket and a bolt or something smaller than the actual stud to remove it with a vise. To replace it, you will need to use the deep well socket on the thread side of the stud, and press the new one in with the vise.

I hope this helps you, and I wish you luck with your repair.

Apr 25, 2009 | 2003 Pontiac Sunfire

1 Answer

Snapped wheel studs on front wheels and need to change them


you have to hammer the studs through the spindle to get them out. then **** the new ones in with a nut and lots of washers. put grease on the washers and threads before you **** the studs in.

Apr 15, 2009 | 1988 Toyota Corolla 4 Door

2 Answers

2003 hyundai elantra gls front wheel stud broke


grab a large punch and hammer and knock out the old broken one. Push the new one in and re tighten. This will pull it into place and because it has splines it should not spin while doing so.

Apr 05, 2009 | Hyundai Motor 2003 Elantra

1 Answer

1990 Sentra How it remove and replace lug studs on front wheel


there is a large nut that holds that hub on. Remove the cotter pin and the cap from the bolt... remove the bolt and the hub comes off.

Robert

Feb 27, 2009 | 1990 Nissan Sentra

Not finding what you are looking for?
1996 Honda Civic Logo

Related Topics:

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...