Question about 1997 Honda CR-V

1 Answer

Flashing S light,check engine light. When car was stopped, it would not start back up for awhile.

Posted by on

  • Soundman111 May 11, 2010

    The flashing check engine light indicates that the engine is misfiring and running poorly enough to damage the catalytic converter and possibly other emissions parts.



    When was the last time you had the car tuned and serviced?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 239 Answers

The oxigen sensor on the exaust is bad

Posted on Feb 08, 2009

4 Suggested Answers

  • 205 Answers

SOURCE: as soon as you start the car check engine starts flashing

Pep boys or Autozone or other chain parts stores will diagnose for free

Posted on Mar 22, 2009

  • 36 Answers

SOURCE: 2003 AUDI Quattro 3.0 check engine light(MIL) stays on

Before you do anything else you are just going to have to read the codes. So buy the maintance book at autozone,locate the little juction box on the fire wall and jump the terminals with a little wire. Then of course sit in the drivers seat turn on the key(do not start) and read the blinks. Then you will know what the problem is.

Posted on May 06, 2009

  • 565 Answers

SOURCE: CHECK ENGINE LIGHT COMES ON

the flashing and check engine lite is indicating a code has been set in the computer. have it plugged into and see what the code is and repair the problem associated with that code. hope this helps

Posted on Feb 01, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 05 Suzuki Forenza that has a flashing check engine light. This started on Tuesday. Had the codes looked up. Car is driving shaky and dash lights are blinking. Any ideas?


fix the anti freeze leak --before you blow a head gasket

what your codes mean

Check Engine Light On, P0300 Random Misfire Code. A random misfire means your engine is misfiring, but that the problem is not isolated to one or two cylinders. It is jumping around in a random way from one cylinder to another. A random misfire code usually means the air/fuel mixture is running lean.

What the P0700 code means. P0700 is set when the PCM detects a malfunction in the transmission control system. This malfunction causes the vehicle to set a Check Engine Light and trigger a failsafe mode. Once the failsafe mode is set it will remain until the fault is repaired or normal operation is detected.

PO133 Oxygen Sensor Circuit Slow Response (Bank1, Sensor1)

Nov 25, 2016 | Suzuki Cars & Trucks

1 Answer

Flashing check engine light


The flashing light is telling the driver the problem is serious enough to damage the catalytic converter.
You need to get the engine computer scanned for trouble codes to proceed.

Mar 05, 2014 | Mazda MAZDA6 Cars & Trucks

1 Answer

No power to car key wont turn


check the alternator and check for a short or ground a wire may be touching the frame you may want to check the engine computer module

Feb 17, 2014 | 2004 Mercedes-Benz S 430

1 Answer

The car shut down while making a sharp right turn but fired right back up and ran albiet roughly with the check engine light flashing for about 3 miles then shut down again going up a short gradual...


Flashing for awhile?

Don't you always start will check light issues first,
& resolve them?

There are codes sometimes even without check lights
You need a professional scanner or PC Scan Software

The fuel pump may be seizing up mechanically or have an
elcetrical issue,such as worn out. Again an Oscilloscope would
be nice there also

Jul 11, 2011 | 1997 Oldsmobile 88

1 Answer

Idisconected my battery for water pump have after market radio didnt think it would be a prob. but it turns over and will not start it has built in alarm and indicator light flashes rapid is there a way...


Insert ignition key,turn forwards to run. Just till red lights & theft/alarm light goes on. Do not try to start or engage starter.Leave on till light stops flashing. It may take up to 10 minutes. Once light stops flashing turn key off. Then start car & let run for awhile.

Mar 21, 2011 | Pontiac Grand Prix Cars & Trucks

1 Answer

CHECK ENGINE LIGHT COMES ON OVERDRIVE LIGHT FLASES, AND THE MOTOR CUTS OUT, LET OFF THE THROTTLE AND THE ENGINE RPMS COME BACK, AFTER AWHILE THE CHECK ENGINE LIGHT GOES OFF AS WELL AS THE FLASHING...


the flashing and check engine lite is indicating a code has been set in the computer. have it plugged into and see what the code is and repair the problem associated with that code. hope this helps

Feb 01, 2011 | 1995 Ford F250

1 Answer

2000 grand am bogs engine light flashes stays on for awhile then goes off


The flashing light is indicating an "over fueling" condition that can cause damage to the catalytic converter.
A defective or stuck injector is typically the root cause.
Take the vehicle to your local Auto Zone and ask to have the trouble codes read. Write the codes down and respond back to me, we can get started on fixing the issue.
Regards,

May 07, 2009 | 2000 Pontiac Grand Am GT

1 Answer

94 Plymouth Sundance.. engine light and sluggish from dead stop! Help


What you do is turn the ignition to the "on" position and back to the "off" position 3 times. On the last "on/off" cycle, leave the key in "on". The check engine light will start flashing. The first group of flashes is the 1st number of the code. There will be a pause and then a 2nd set of flashes will be the 2nd number of the code. If there's more than one code, there will be a pause and then there will be another set of flashes for the next code and so on. A Haynes or Chilton's repair manual, available at any parts store, will tell you what the codes mean.

Jul 09, 2008 | 1994 Plymouth Sundance

Not finding what you are looking for?
1997 Honda CR-V Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...