Question about Chevrolet Blazer
you can buy a puller kit for the AC clutch for about $35.00 the bearing is about $25.00 you might be able to do it without removing it from the engine saving your freon. http://www.tooltopia.com/index.asp?PageAction=VIEWPROD&ProdID=7741
Belt tensioners just unscrew.They are also inexpensive
Posted on Apr 13, 2009
1995 should have 134A. Look on the compressor and in the middle of it will be a sticker that says 134a or r12. If it is r12, you must retrofit it in order to charge it yourself.
Posted on Jun 24, 2009
if the "hold-in" coil for the compressor shaft is good, take a "butterfly" impact wrench (due to space limitations), then remove shaft nut and very carefully put nut on shaft loose and rap the end of the shaft with light forward pressure applied to clutch, it sometimes works this way, otherwise you'll need to rent an A/C clutch removal tool at a parts store, but remember be very careful how hard you rap shaft and do it with something like hard plastic/wood
Posted on Oct 09, 2009
try checking air cleaner box to be sealed or dirty air filter and try to clean mass air flow sensor also check for dirty air intake only clean mass with special mass cleaner . also look for vac leaks and fuel pressure .
Posted on Jan 28, 2010
Tips for a great answer:
Mar 18, 2013 | 1995 Chevrolet Blazer
Sep 22, 2011 | 1993 Chevrolet S-10 Blazer
Feb 02, 2011 | 1995 Chevrolet Blazer
Mar 26, 2010 | 1995 Chevrolet Blazer
Feb 22, 2010 | 2001 Chevrolet Blazer
Jul 02, 2009 | 1995 Chevrolet Blazer
Jun 24, 2009 | 1995 Chevrolet Blazer
Feb 21, 2009 | 1999 GMC Jimmy
952 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: