Question about 2000 Jeep Cherokee

2 Answers

Replacing front wheel hub assembly on a 1999 Jeep Cherokee

Posted by on

  • Anonymous Jan 07, 2009

    how do i get the assembly off? I have taken off the large bolt and the three rear bolts off but it does not move.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 133 Answers

Should slip out pretty easy, but if its rusted together good luck. will need to use plenty of penetrating oil and let it soak. if it still wont come out yoU'll need to put the bolts back in a couple threads and put something like a socket over the bolt heads. if you have an air hammer use that but if not try hitting it with a regular hammer. will need to work all three bolts so it comes out straight. use anti seize on everything when you put it back together

Posted on Jan 10, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 359 Answers

It should be fairly easy.... your question is???

Posted on Jul 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you repack front wheel bearings on a 98 Cherokee 4X4


OP<
Posted by J Sparacino on Aug 31, 2016
you double posted. why do that????
no, the hubs are integrated bearing hubs.
here read the parts pages,
see any tapered bearings there,
if not sold , pray tell , how can you pack the bearing not in hand.
not only that, there are like 1000000 books on how to pack front bearing, if they were removable and are not.
why not look first then post.? at car and the book, !
or read the FREE FSM, it says what ?, unbolt them
and replace the integrated hub assembly.
that is a fact. 300 times ive posted the free book, now.
and is still there, and the words still real ,still jeep words and all accurate. sigh.
below is rockautos list of after market hub assemblies.
do not get confused at those needle bearings, those are actually front axle shaft bearings, not hub wheel bearings. fact.
wheel bearing are ball or tapered rollers, to handle lateral huge loading.

http://www.rockauto.com/en/catalog/jeep,1998,cherokee,4.0l+l6,1315943,brake/wheel+hub,wheel+bearing+&+hub+assembly,1636?a=Referer+duckduckgo.com+URL+%2F

56a4ac86-d271-4704-9005-ab6d4f0bc76f.jpg

Aug 31, 2016 | 1998 Jeep Cherokee 4WD

1 Answer

Replace Front Wheel Hub Bearing 2002 Jeep Grand Cherokee 2 wheel drive


Removal
  1. Raise and support the vehicle.
  2. Remove the wheel and tire assembly.
  3. Remove the brake caliper, caliper anchor, rotor and ABS wheel speed sensor.
  4. Remove the cotter pin, nut retainer and axle hub nut.
  5. Remove the hub/bearing mounting bolts from the back of the steering knuckle. Remove hub/bearing from the steering knuckle and off the axle shaft.
Installation
  1. Install the hub/bearing to the knuckle.
  2. Install the hub/bearing-to-knuckle bolts and tighten to specification.
  3. Install the hub washer and nut. Tighten the hub nut to specification. Install the nut retainer and a new cotter pin.
  4. Install the brake rotor, caliper anchor, caliper and ABS wheel speed sensor.
  5. Install the wheel and tire assembly.
  6. Remove the support and lower the vehicle.

Apr 22, 2012 | 2002 Jeep Grand Cherokee

2 Answers

How do I remove and install hubs on the front end of a 97 jeep grand cherokee?


It is actually very easy. Lift the vehicle and support it properly remove the 5 lug nuts retaining the wheel. Remove the wheel. If it is a 4 wheel drive remove the spindle nut locking the c.v. axle to the hub. Remove the washer. Push the axle through the splined hub. using a 13 mm or 15mm depending on the hub remove the three bolts reatining the hub assemble to the steering knuckle. assemble in reverse order.

Feb 27, 2011 | 1997 Jeep Grand Cherokee

1 Answer

How do i install a hub assembly for my right front wheel on my 1992 jeep cherokee?


jack it up , take the wheel off, take brake assembly off, should be 3 bolts on back side of hub assembly, take those out( you'll need a cold chisel, a hub puller, and maybe a torch, once u get the hub off, follow the directions in reverse.

Oct 28, 2010 | Jeep Cherokee Cars & Trucks

2 Answers

2006 Jeep Grand Cherokee grinding while steering


I'd bet your brake rotors are grooved and need to be resurfaced (or replaced if they are too thin). This also means you should replace the pads too.

Apr 03, 2010 | 2006 Jeep Grand Cherokee

1 Answer

CHanging out the front hub assembly on a 1992 Jeep Cherokee 4wd


Below is a link to the front rotor and all components on a 4WD Jeep Cherokee.

http://www.chiltonlibrary.com/content/images/8674/images/86749g36.pdf

4-Wheel Drive
  1. Loosen the lug nuts on the front wheels.
  2. Raise and support the vehicle safely.
  3. Remove the front wheels.
  4. Remove the calipers, but don't disconnect the brake lines. Suspend the calipers out of the way.
  5. Remove the rotor.
  6. Installation is the reverse of removal. Tighten wheel lug nuts to 75 ft. lbs. (101 Nm).
Best of luck!
Greg

May 20, 2009 | 1992 Jeep Cherokee Sport

1 Answer

Need instruction on how to replace CV joints on 1997 Jeep Grand Cherokee


remove front wheels , one or both at a time , remove caliper and rotor , remove cotter pin and nut on shaft , there are three or four bolts on back side of hub , remove the hub bearing and shaft should slide out , i would see if complete rebuilt assemblies are available , faster and easy this way

Feb 19, 2009 | 1999 Jeep Cherokee

Not finding what you are looking for?
2000 Jeep Cherokee Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...