Question about BMW Z3
SOURCE: Thermostat location
you didn't mention what size engine you have, so i assumed its a 1.8L. thermostat is located at the housing just above the waterpump on the front of the engine. its #5 in the attached link http://www.realoem.com/bmw/showparts.do?model=CJ11&mospid=48077&btnr=11_1393&hg=11&fg=35
Posted on Jan 27, 2009
If the radio is displaying code wait, or wait, then the ignition and radio must remain on for 1hour. I would contact a dealer within the USA and provide them with your radio serial number. The serial number can be displayed in the radio by pressing and holding down the "M" button while turning on the ignition.
Posted on Mar 15, 2009
Ths is an excellent DIY by wynlover, it is in pdf format for download.
Posted on Jul 04, 2009
Allow some warm water mixed with dish soap to penetrate around the edges of the old ornament. Gently slide a pry tool into the top or bottom center. The hold downs (plastic clips that SHOULD pop) are going to be on the left/right middle. While continuing to pour some warm water and dish soap around the pry point, work the pry tool around the circle. If you don't have a pry tool, use a non-ridged butterknife wrapped in electrical tape. It will take some force to remove, but it will come out.
Please note, you CANNOT re-use the clips. Your new hood ornament should have some with it.
Remove ALL old adhesive from the paint surface so that the new ornament will go on smoothly. Best of luck!
Posted on Apr 04, 2010
Tips for a great answer:
Jun 16, 2011 | 1998 BMW Z3 Roadster
Sep 17, 2010 | 1999 BMW Z3
Dec 05, 2009 | 1999 BMW Z3
Oct 26, 2009 | 1999 BMW Z3
Aug 15, 2009 | 2001 BMW Z3
Apr 29, 2009 | 1999 BMW Z3
Feb 27, 2009 | 1999 BMW Z3
Dec 08, 2008 | 1996 BMW Z3 Roadster
Jun 30, 2008 | 1999 BMW Z3
Mar 25, 2017 | BMW Cars & Trucks
199 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: