Question about 2006 Pontiac G6
Looking for the IAT on my G6. I know its in with the wires on my MAF sensor but of the 5 wires which two are the ones im looking for?
Posted on Sep 06, 2008
Yes. That is exactly it. The Air Intake Temp Sensor is built into the Mass Air Flow Sensor on the Air Filter Box. Below is a picture...
I personally have not connected one of these Chips to a Tahoe...What I can provide you with, is the Connector Diagram so you know exactly what Wires you need to Splice in to. See below...
I hope this helps you. If you have any more questions or need any more diagrams, please don't hesisitate to ask...Thanks again, JShreader.
Posted on Mar 31, 2009
It is small and round (2 wire connector) and located either in the flexiable air intake hose to the engine or in the engine air filter housing.
Posted on Nov 18, 2008
If your looking for the Intake Air Temp/Manifold Absolute Pressure sensor (IAT/MAP)(2003 model year and up) It is on the top of the intake manifold, just to the left of the #3 injector fuel line. There are 2 small Torx screws holding it.
Posted on May 27, 2009
The Intake Air Temperature (IAT) sensor determines the air temperature
inside the intake manifold. Resistance changes in response to the
ambient air temperature. The sensor has a negative temperature
coefficient. As the temperature of the sensor rises the resistance
across the sensor decreases. This provides a signal to the PCM
indicating the temperature of the incoming air charge. This sensor helps
the PCM to determine spark timing and air/fuel ratio. Information from
this sensor is added to the pressure sensor information to calculate the
air mass being sent to the cylinders. The IAT is a two wire sensor, a
5-volt reference signal is sent to the sensor and the signal return is
based upon the change in the measured resistance due to temperature.
Fig. 1: The IAT sensor is located in the air cleaner outlet tube-2.2L engine and 2.4L engine
Posted on Apr 11, 2010
Tips for a great answer:
Nov 22, 2012 | Cars & Trucks
The Mass Air Flow (MAF) sensor/Intake Air Temperature (IAT) sensor is located in the air cleaner case.
// // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 34; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]>
The Intake Air Temperature (IAT) sensor is an integral part of the Mass Air Flow (MAF) sensor. Looks like this:
May 12, 2011 | Nissan Pathfinder Cars & Trucks
Apr 12, 2011 | Ford Explorer Cars & Trucks
Apr 05, 2009 | 2004 Dodge Ram 3500 Truck
Mar 31, 2009 | 2008 Chevrolet Tahoe
Mar 12, 2009 | 2002 Nissan Frontier Crew Cab
Nov 18, 2008 | 2005 Nissan Altima
Sep 21, 2008 | 2006 Pontiac G6
686 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: