1. Open the hood.
2. Remove the front turn signal/parking lamp
assembly. See Front Turn Signal, Sidemarker and
Parking Lamps on page 5-46.
3. Pull the assembly away from the vehicle.
4. Unscrew the black retainer ring that holds the bulb
assembly in place.
5. Pull the bulb assembly straight up from the
lamp housing.
6. Unhook the electrical connector by lifting up the
blue tabs and pulling the bulb out.
7. Install the new bulb through the black retainer ring
and into the electrical connector.
8. Tighten the black retainer ring in place. Push the
bulb firmly enough so that the blue tabs hook over
the tab on the bulb.
9. Carefully put the bulb assembly back into the lamp
housing. Be careful not to damage the bulb on the
headlamp aiming bar.
Same guide is here in the manual along with pictures.
http://www.extendedgmwarranty.com/owners-manual/pontiac/2005-Pontiac-Montana.pdf
On page 370
476 views
Usually answered in minutes!
×