- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would suspect the master switch,however you should check inside the rubber boot where the wires go into the drivers door from the body,often a wire will break there due to the drivers door being the most used.
did you check the fuse or relay for windows! if need be take out master switch and check for power. if power, then maybe the ground wire is bad. have a good day !!
easy part first....have mechanic check all co2, and air in-take sensors, Linkage for air in-take may need adjustment. Run fuel pressure check. Check all fuses for door locks and windows. Run test for electrical short. If nothing is found, replace power window motors.
If all of the windows do not work and the fuse is fine, the problem is either the window switch on the drivers door or the wire is bad that provides power. Remove the door panel and meter the switch, if you get power to the switch but not through the switch the problem is the switch. If you are not getting power to the switch you know you have a wiring problem.
×