Question about 2000 Mazda Millenia

2 Answers

When turning hear a clicking noise from drivers front wheel 1999 mazda millena s

Posted by on

  • francismills Feb 07, 2009

    I have a 1997 mazda mallenia with 275,000 miles. There is a clicking noise coming frome the right front wheel. Is this a worn CV joint? If so how do i replace it?

  • Anonymous Apr 15, 2009

    i have the same loud clunky ticking noise when i turn left...and sometimes turning right. i have a 95 millenia...

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 21 Answers

To add to that. The bad CV boot is easily identified. If you turn to the left and hear the clicking that means the ride CV boot/axle is the one in question. So if you plan on doing this yourself, make sure it is the correct CV axle. Sometimes it is a good idea to change both axles if it has been awhile since they were changed as the other one will go out soon.

Posted on Jul 31, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Most likely the cv boot is bad will need to be replaced recomend change the whole cv axle

Posted on Jul 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mazda axle shaft


not anymore than any other front wheel drive car. are you having a noise(clicking or clunking) coming from the front only when turning. if so then you have a bad cv joint on the axle. its cheaper to replace the entire halfshaft(axle) than just the bad joint, as you get a rebuilt halfshaft complete. if you hear the noise when turning left then the left halfshaft is bad if you hear it only when you turn right then the right side is bad. you don`t say what issue you are having.

May 25, 2014 | 2008 Mazda 6 2.0

1 Answer

2011 mazda millena need to find the fuel pump relay


Normally it is under the hood in the Fuse/Relay center.

Aug 09, 2011 | 1999 Mazda 626

2 Answers

I'm having the same exact problem as cpurdey with my 2004 Mazda MPV. My mechanic is quite certain it is not the wheel bearing or hub but seems to think it's a bearing in the transmission. Is...


If it gets worse as you're turning right, but not left - Most definitely a wheel bearing on the right side. The right turn puts more stress on the right wheel - louder noise - turn left and release the stress - no noise. You can also lift the vehicle up on a jack and listen to the wheel and hear the bearing in the hub making noise.

Jun 02, 2011 | 2004 Mazda MPV

1 Answer

When turning the wheel all the way, going around a corner, i hear a clicking sound, what is the probable cause?


Quite often clicking noise is from the front axle trunion (U-joint).

You can see them, one per side, using a tool simular to a long screw driver and gently

prying upward is one way to see if there is play in the u-joint.

When they get worn they may click, snap or clunk, but usually click in 2WD.

Feb 26, 2011 | 1999 Dodge Ram

1 Answer

When I reverse my R reg mazda there is a slightly screeching noise.When driving I hear a sound from the front drivers wheel at slow speed that is like gentle slapping.Any ideas?


if your wheels are chrome,check the inside of the wheel for pealing chrome it hits the caliber and makes the sound you described

Dec 24, 2009 | 1989 Mazda 323

1 Answer

There is a humming sound coming from the front end of my 1999 oldmobile alero. Only happens when the car is moving. I dont hear itat idle or even when pushing the gas at idle. could it be my transmission...


Hello! If the humming noise is speed related(gets louder as vehicle speed increases)check front wheel bearings. If the noise goes away when turning one way or the other then it will most likely be in the front wheel bearing. If you turn the wheel(while moving)to the right and the noise goes away it is on the right side. If you turn the wheel to the left and the noise goes away its on the left side. Hope this information helps!

Sep 13, 2009 | 1999 Oldsmobile Alero

2 Answers

Sounds like the axle popping


well turn the wheel to the right or left and look at the boots on the cv shafts if the are torn open the shaft will need to be replaced.

Jan 08, 2009 | 1999 Mazda 626

2 Answers

Noise on acceleration


vibrations or bearing noise possibly from engine or wheels need more info to help

Sep 23, 2008 | 1999 Mazda 626

2 Answers

Tranny or axle problem or what could be wrong?


Someone may have put a rebuilt cv joint in and it is not any good

Sep 03, 2008 | 1999 Mazda 626

Not finding what you are looking for?
2000 Mazda Millenia Logo

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...