Question about 2002 Chrysler Concorde

1 Answer

Turn Signals My turn signals and my emergency signals are not working. All other lights on my panel work, everything else seems fine. Could this be a fuse. I bought used and don't have a manual. Where is the fuse box located and are the fuses labeled? Thank you, Vickie Stricklind

Posted by on

  • alashorte Jul 29, 2008

    Thank you, accoridanman,
    No the signals do not work on the outside either.
    Vickie


  • alashorte Jul 30, 2008

    Thank you very much for your response. I will check it out.
    Vickie


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 979 Answers

The body control fuses are located in the left hand side when the driver door is open. The panel just pops off. All fuses are labeled. Do the signals work on the outside? This would tell me that the dash has been off for service and not replaced properly....accordianman

Posted on Jul 29, 2008

  • Michael Borelli Jul 29, 2008

    Okay, the signal flasher might be the culprit. It too, is inside the panel with the fuses....accordianman

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signal


Find your fuse panel. There should be 2 round metal ones that look different from the regular fuses. These are your flashers. Most have 2. One is for your turning signals, the other is for your emergency flashers. If your turning signals are not working, then simply switch them. Now your signals should work fine. Then go to the store at your convenience to pick up a new one to replace the emergency flasher.

Jun 08, 2013 | Hyundai Motor 1999 Tiburon

1 Answer

No turn signals on 98 grand marquis


I would check for power at the fuse then at the turn signal switch.

Jul 25, 2012 | 1998 Mercury Grand Marquis

1 Answer

Turn Signals quit working


Sounds like the turn signal flasher is going bad. The easy way to find wher the flasher is hidden is turn the turn signal on and find the clicking, that is the flasher. The emergency flashers work fine because they use a different flasher.

May 05, 2010 | 2000 Audi TT

1 Answer

1997 Chevy Tahoe both turn signals stopped working


Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Jul 21, 2009 | 2001 Chevrolet Tahoe

1 Answer

Parking lights quit working 2002 dodge ram 1500


does the instrument panel lights come on when you turn on the park lights only (no headlights)? If not it could be the switch itself.

Jun 17, 2009 | 2001 Ford Taurus

1 Answer

Turn Signals work intermitently on 2000 Dodge Ram 1500 Pickup


My turn signals worked fine until last night when I ran my battery down and had to get a jump. I realized right away that my turn signals suddenly didn't work. My theory hasn't been tested, but I am going to unhook my battery cables and reconnect again to see if that does anything. If not, I'll check out the steering wheel and that big square thing by the fuses. Thank you for all the posts and I was so happy to find this web page!

Dec 05, 2008 | 2000 Dodge Ram 1500 Truck

1 Answer

Signals


check fueses.turn all the lights if one of the light is out replaceit

Aug 22, 2008 | 2001 Kia Sephia

Not finding what you are looking for?
2002 Chrysler Concorde Logo

Related Topics:

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...