Question about 1996 Dodge Intrepid

1 Answer

Dodge intrepid problem with over heating and flow problem

Posted by on

  • Anonymous Mar 22, 2009

    heats up and boils over


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try turning the thermostate over, you might have it in upside down, worked for me

Posted on Mar 25, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2003 Dodge Intriped SE. It is over heating and the heater does not blow hot air in the moring after the car is warmed up.

You likely have low coolant causing a large air pocket. This will cause the sensor to pick up the hot steam but the lack of flow through the heater core will not heat up the interior.

Feb 22, 2011 | 2003 Dodge Intrepid

1 Answer

Blows heat and the fan is off air and heat is also off

newer cars the fan runs constantly, usually. designed to keep fresh air flowing into car .

Jun 14, 2010 | 1994 Dodge Intrepid

2 Answers

My 97 intrepid is idle to hight

I'm guessing this Intrepid is a 3.5 cause I have never had this problem with a 3.3 But what I found what always caused it in a 3.5 is bad intake gaskets allowing more air to flow into the engine. Change both upper and lower intake gaskets and this should fix the problem. However when changing the lower intake gaskets there are two bolts that are probably gonna give you problems. The one closest to the front and the one closest to the back. They are the bolts that hold the intake down and go into the head near the coolant ports. These bolts are probably going to break off. The good news is they most of the time break off and there is still a lot of bolt left once you get the intake off to get a vice grips on. Have a torch with a good heating tip handy and someone that really knows how to use it and heat the cyl head around the bolt and then try to get it out with the vice grips, but be very careful cause heating aluminium can be very tricky too much heat and you ruined the head.

Feb 25, 2010 | 1997 Dodge Intrepid

1 Answer

2002 dodge intrepid with p0441

Evap Purge Flow Monitor
Insufficient or excessive vapor flow detected during evaporative emission system operation.

Jan 21, 2010 | 2002 Dodge Intrepid

1 Answer

I have a 2001 dodge intrepid. no heat, blower motor is working, not over heating, coolant level is okay

The valve controlling the  flow of coolant to the heater is stuck shut - either the valve itself or the cables controlling it are faulty. You will have to check which yourself.

Nov 19, 2009 | 2001 Dodge Intrepid

1 Answer

No hot air no temp control can not direct air flow

I have a 98 dodge intrepid wjth a digital temp control Icann't get heat when I go up with temp or in manual over ride.Line's to the heater core are hot both coming and going.Checked # 17 fuse its good.Could it still be the heater core??

Oct 13, 2009 | 1998 Dodge Intrepid

1 Answer

2000 intrepid with 2.7 -- overheads when going up

may have a restrictive radiator, leaking head gaskets can also cause overheating under loads. have your radiator flow checked and your engine block tested for leaking head gaskets

May 11, 2009 | 2000 Dodge Intrepid

2 Answers


sounds like it maybe low on antifreeze...check your coolant bottle...if it is low you need to find the leak...possibly a hose..the radiator ...or water pump...there is also the chance the heater core is plugging up. and the flow is very low

Nov 12, 2008 | 1997 Dodge Intrepid

1 Answer

Over heating

it can only be two other things, make sure the fan is working and if the fan is working, then you need to change the head gasket.

Jul 27, 2008 | 1997 Dodge Intrepid

Not finding what you are looking for?
1996 Dodge Intrepid Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides