Question about 1995 Ford Taurus

1 Answer

Idle control where is the idle control valve located on my 1995 ford taurus. it is idle to fast

Posted by on

  • 2 more comments 
  • Anonymous Mar 12, 2014

    where is idle air control valve located

  • Anonymous Mar 18, 2014

    how to replace idle control valve ford bantam

  • Anonymous Mar 18, 2014

    how tom replace idle control valve ford bantam

  • Anonymous Mar 26, 2014

    Fast idle after warm up

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

The Idle control Valve will not in most cases help you check for a vacuum leak that csuses High Idle in Taurus a lot check for the PCV hose.

Posted on Jul 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 ford taurus doesn't idle down until warm when driving


you might have to have the programing checked and possiblly adjusted

Jan 18, 2014 | Ford Cars & Trucks

1 Answer

Why does my ford taurus idle high code P1506


The code is for the idle air control valve which controls idle speed.
The problem could be a faulty control valve, or a vac leak which is letting in air to the intake and bypassing the control valve.

Jan 19, 2013 | 2000 Ford Taurus

1 Answer

2005 Ford Taurus low idle


Replace the idle valve with a factory one and remove the negative battery negative cable for 5 minutes to reset the idle control system to base line settings.

Oct 17, 2012 | 2005 Ford Taurus

2 Answers

Why does my 2000 ford taurus idle so high when i start it


this is normal, if the idle wasn't high (about 2,500 RPM) the engine wopuld stall out until it warms up to normal temperature. If it is above 3000 RPM for more than a few seconds you have a problem.

Mar 25, 2010 | 2000 Ford Taurus

1 Answer

3.2 liter yamaha engine manual IAC valve How do I replace the IAC valve on this engine? Steps? I just bought a new one and I need to get it replaced. FORD 1994 Taurus SHO 3.2 liter engine YAMAHA


may just need cleaning with carb cleaner.

here is 1996, oldest I have:

Section 03-14: Engine Controls, Electronic 1996 Taurus, Sable Workshop Manual
REMOVAL AND INSTALLATION Idle Air Control (IAC) Valve Removal
  1. Disconnect battery ground cable (14301). Refer to Section 14-01 .
  1. Disconnect the engine control sensor wiring (12A581) from the idle air control valve (IAC valve) (9F715) at the idle air control valve electrical connector.
  1. Remove the two idle air control valve retaining bolts.
  1. Remove the idle air control valve and idle air control valve gasket.
Installation
  1. NOTE: If scraping is necessary, be careful not to damage idle air control valve gasket surfaces, or drop material into intake manifold (9424) or throttle body (9E926) (depending upon application).

    Clean idle air control valve gasket mating surfaces.
  1. To install idle air control valve, reverse Removal procedure.
  1. Tighten the idle air control valve retaining bolts to 8-12 Nm (71-106 lb-in).
33b4417.gif

Jan 14, 2010 | 1994 Ford Taurus

1 Answer

Won't start while hot, wait an hour fires right up and runs / idles /drives smooth


FORD: 1995-96 CONTOUR, CROWN VICTORIA, ESCORT, TAURUS, THUNDERBIRD
1996 MUSTANG LINCOLN-MERCURY: 1995-96 CONTINENTAL, COUGAR, GRAND MARQUIS, MARK VIII, MYSTIQUE, SABLE, TOWN CAR, TRACER LIGHT TRUCK: 1995-96 AEROSTAR, BRONCO, ECONOLINE, F-150-350 SERIES, RANGER, WINDSTAR
1996 EXPLORER This TSB article is being republished in its entirety to include the 1995 4.6L Thunderbird/Cougar. ISSUE: After a 1-4 hour engine soak time, long crank times and/or long crank to start followed by a stall may occur on some vehicles. No further stalling or rough idle will occur after the engine is running. The long crank and/or stall may be due to the Idle Air Control (IAC) Valve sticking.
ACTION: Replace the IAC Valve with a revised IAC Valve if no Diagnostic Trouble Codes (DTCs) are present. Refer to the following Service Procedure for details.
SERVICE PROCEDURE
  1. Perform normal diagnostics and correct any DTCs as required by referring to the appropriate year Powertrain Control/Emissions Diagnosis (PC/ED) Service Manual.
  2. If no codes are present, replace the IAC Valve by referring to the appropriate model/year Service Manual, Section 03-14. Refer to the following Idle Air Control Valve Application Chart for proper IAC usage.

    IDLE AIR CONTROL VALVE APPLICATION CHART Model Year Vehicle Engine Revised Part Number PASSENGER CARS 1995 Escort/Tracer 1.9L F5DZ-9F715-BA 1996 Escort/Tracer 1.9L F6CZ-9F715-BB 1995 Contour/Mystique 2.5L F5RZ-9F715-AB 1996 Contour/Mystique 2.5L F6RZ-9F715-AA 1996 Taurus/Sable 3.0L 4-Valve F5DZ-9F715-DA 1995 Taurus/Sable 3.0L 2-Valve F5DZ-9F715-EA 1996 Taurus/Sable 3.0L 2-Valve F6DZ-9F715-DA 1995 Taurus SHO 3.2L F6DZ-9F715-CA 1996 Taurus SHO 3.4L F6LZ-9F715-AC 1995 Taurus/Sable 3.8L F68Z-9F715-EA 1995 Crown Victoria/Grand Marquis/Town Car 4.6L 2-Valve F5PZ-9F715-AA 1996 Crown Victoria/Grand Marquis/Town Car/Mustang 4.6L 2-Valve F6AZ-9F715-EB 1996 Mustang 4.6L 4-Valve F65Z-9F715-BC 1995-96 Continental 4.6L 4-Valve F5OZ-9F715-AB 1995 Mark VIII 4.6L 4-Valve F3LZ-9F715-AA 1996 Mark VIII 4.6L 4-Valve F6LZ-9F715-AC 1995 Thunderbird/Cougar 4.6L 2-Valve F5PZ-9F715-AA 1996 Thunderbird/Cougar 4.6L 2-Valve F6AZ-9F715-EB LIGHT TRUCKS 1995-96 Ranger 2.3L F5OZ-9F715-AB 1995-96 Ranger 3.0L F67Z-9F715-AA 1995 Aerostar 3.0L F68Z-9F715-DA 1996 Aerostar 3.0L F69Z-9F715-AA 1995-96 Windstar 3.0L F68Z-9F715-DA 1995 Windstar 3.8L F68Z-9F715-EA 1996 Windstar 3.8L F68Z-9F715-CB 1995-96 Econoline/F-150-350 Series/Bronco 4.9L F68Z-9F715-EA 1996 Explorer 5.0L F67Z-9F715-BA

Nov 03, 2009 | 1996 Ford Explorer

3 Answers

2003 ford taurus idle problems had trouble codes


A code P0174 may mean that one or more of the following has happened:
  • The MAF (Mass Air Flow) Sensor is dirty or faulty. Note: The use of "oiled" air filters can cause the MAF to become dirty if the filter is over-oiled. There is also an issue with some vehicles where the MAF sensors leak the silicone potting material used to protect the circuitry.
  • There could be a vacuum leak downstream of the MAF sensor. and your solutions are.
    • In the vast majority of cases, simply cleaning the MAF sensor does the trick. Consult your service manual for it's location if you need help. I find it's best to take it off and spray it with electronics cleaner or brake cleaner . Make sure you are careful not to damage the MAF sensor, and make sure it's dry before reinstalling
    • Inspect all vacuum and PCV hoses, replace if necessary
    • Check for a dirty fuel filter and proper fuel pressure

Oct 24, 2009 | 2003 Ford Taurus

2 Answers

1992 ford 3.0 liter has fast idle


That isn't alot to go by but you may have a broken throttle return spring, sticking throttle cable, a TPS(that is out of range), a vacuum leak, a defective IAC valve(idle air control valve) and/or maybe the engine light is on. If so have it scanned for codes. Good luck.

Apr 28, 2009 | 1992 Ford Taurus

1 Answer

2001 ford taurus will not idle down


several things can do this but most likely would be
1 TPS trottle postion sensor = replace
2 stuck butterfly valve inside the trottle body = clean out with trottle body cleaner try to get most of the black build up with a old tooth brush
3 bad trottle cable= feel the cable make sure it moves freely if not replace it

Feb 20, 2009 | 2000 Ford Focus

1 Answer

1995 ford escort idle problem


The IAC valve is usually the problem with the 1.9 Escorts ,causing a very poor engine idle at a stop. It is located on the side of the throttle body .

Aug 18, 2008 | 1993 Ford Escort 4 Door

Not finding what you are looking for?
1995 Ford Taurus Logo

Related Topics:

715 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...