Question about 1999 Chevrolet Venture

4 Answers

Wipers stays up when off they don't lay down.

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Solved!!
I fix it on two montana . i Sit an afternoon to realise olly drop of oil is needed!!
So look at this: Open the hoot and locate the disk on the top of the wiper motor . When it run it turn allways in the same direction. when it goes to park the motor go to revese and during these process a little arm under these disk jam the one under and reverse rotation to park the wiper arm .
So look carefully at the disk .You can see there two disk stick together. put oil to unsqeeze it . you can do it when engine is off....
Enjoy it:
Becosses

Posted on Aug 21, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 62 Answers

There is a computer board on your wiper motor that is bad, you can buy a new one at almost any oarts store. dont replace whole wiper motor.

Posted on Jul 29, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had same problem, I was able to fix mine pretty easy. first turn off wipers and remove key as there is a possibility of getting your fingers injured if wipers move. On my 2003 I removed weather stripping and wiper motor cover they just pull off. Then there is a small plastic cover that covers the cams on top of wiper motor, that snaps on and off, remove it.Use a good spray lubercant (Blaster) (WD40) or any penatrating oil and spray the cams at every angle, top and bottom. let sit for a few minutes, I lightly tapped on the cams with a hammer.with everything out of the way turn your wipers on and off to see if they are working, if not repeat. This worked for me first try.

Posted on Jan 27, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Intermittent speed does not work

Posted on Aug 05, 2008

  • ronpinto Aug 05, 2008

    intermittent wiper mechanism doe not work

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 crown vic- drivers side wiper arm loose, blade will not lay flat when cleaning


Sometimes you need to bend the arm to put more pressure on the glass.

Mar 29, 2014 | 1996 Ford Crown Victoria

1 Answer

Car does not turn off after changing fuse


car stays, on, does that mean engine will not shut down.
or mean the wipers stay on, after turning them off
1:yes, wiper, bad internal wiper switch, (bad wiper motor)
2: no:?
wiring hacks (after market installs of something gone worn)
bad igniton switch.

Dec 12, 2013 | Acura Integra Cars & Trucks

1 Answer

Wiper stay in upright position when on intermittent


before anyone replaces the motor, check the the small arms that connect the wipers are well oiled and in full rotation. While your car is off, slowly and with little force push the wiper arms down and watch that the small outer connector arm rotates in a full circle. Have a friend grease(white) or oil with machine oil these connectors. if they move but don't fully rotate, buy and replace those before you do a new wiper motor.

Dec 29, 2011 | 2001 Pontiac Montana

1 Answer

My windshield wipers wont work


Check fuses first before laying down the money if it is wiper motor it's about $40.00 bucks at advanced auto don't get the one made in china

Jan 29, 2011 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Windhsield wipers will not lay down when shut off. I tried to adjust the arm on the post


probly bad motor stop not timmed right or wiper bushings are gone

Apr 14, 2010 | 2004 Dodge Ram

1 Answer

Wipers wont go down when turn off. They stay up


the wiper motor has a return swich built in to its gearing that switches the motor off when the wipers are in the correct possition.Relace the wiper motor is the only answer

Nov 29, 2009 | 1997 Pontiac Sunfire

1 Answer

Windshield wipers stopped working


wiper transmission likely came a part in dash rove all covers evaluate what came a part either reconnect or replace item

Apr 05, 2009 | 2007 Chevrolet Cobalt Coupe

2 Answers

89 samurai wipers have stopped working where do I find the wiper motor and get to it


the wiper motor is not so hard to get.... just lay down your whole frame.

Mar 09, 2009 | 1989 Suzuki Samurai

2 Answers

Timing Venture wipers


disconnect the wiper transmission from the motor, then run the motor and turn the motor off with the wiper switch, this will park the motor, re-attach the wiper trans linkage so the wipers are parked/down

Dec 05, 2008 | 2000 Chevrolet Venture

Not finding what you are looking for?
1999 Chevrolet Venture Logo

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...