Question about Pontiac Grand Am

2 Answers

Blinkers won't work - Grand Am Pontiac Cars & Trucks

Posted by on

  • bonne93 Dec 22, 2008

    My blinkers don't work but my hazards lights do so I am assuming the bulbs are fine. What else could be wrong?

  • Anonymous May 11, 2009

    my blinkers and my 4 ways aren't working ... i bought a new flasher but i can't find where it goes

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pontiac Master
  • 60,867 Answers

If neither turn signal works then you may need a new turn signal flasher, it is located under the dash near the steering column(in most cars), have a parts store pull one and show you so you can see what you are looking for.

Posted on Jul 28, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The Pontiac Transsport (modell 89->) indeed does have two turn-signal flashers. One is located in the direct vicinity of the fuse-box; it's the relay center of the car, located slightly above the right legcompartiment. But this one is only for your hazard-lights. The operation of your turn signal as well as the turn-signal-function of your breaklights is steered through relay #2. Thís one is located a little left of the steering column.

You remove the lower dashboard-clothing at the steering side. Also you remove the lighter coulored plastic moulding under-around the steering column (Pull it gently towards yourself; mounted with three clamps). Now about 4" left of the steering wheel you have a metal bracket at about knee height. This bracket is atached from the outside with two bolts (nut about 7mm) on the inside of a plastic cover. if you unscrew them, the whole metal bracket is released and to be removed. You find another electric device plus... the #2 turn signal flasher. If your normal turning signal fails but you still have your hazard lights, right now you arrested the villain. In my car both the turn signal relais were the same type.

Hope someone can use the above instruction, and forgives me my (eventual) poor english.

Harry de Vries, The Netherlands

Posted on Sep 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dash and blinkers for 1989 Ford Thunderbird


The dash lights should work in any position. If you mean the warning lights, that and the turn signals go thru the key switch, so that could be a problem with that switch.

Jul 03, 2013 | 1989 Ford Thunderbird

1 Answer

The hazard light switch broke and my hazards won't quit flashing tired sticking two screws in there now blinkers don't work


At this point you will need to replace the multifunction switch. It looks like used may be a good option for your vehicle. This is a relatively easy part to replace. You will need a couple TORX sockets but other than that its pretty straight forward once you remove the column covers.

Apr 10, 2013 | Cars & Trucks

1 Answer

2001 jeep wrangler. Brake lights won't work but


Check the brake control switch situated just above the break pedal arm under the dashboard. Could be a wire loose or unplugged or the switch itself could be faulty

Mar 07, 2013 | Cars & Trucks

1 Answer

The blinker in my 2002 Chevy Malibu won't stop making the blinker noise...even when the blinker isn't turned on. Driving me insane!


the blinker control under and to the right of the steering column under the knee panel is out its a cheep part you remove the knee panel an turn on the turn signals listen for the ticking you find that part unplug it and replace it yours is bad worn contacts this is a cheap part easy to fix don't let people rip you off good day

Feb 15, 2013 | 2002 Chevrolet Malibu

1 Answer

2000 Saturn blinkers won't work


Have you checked the fuses for those two circuits and the turn signal switch for power ?

Jan 23, 2013 | 2000 Saturn Ls 4dr Sedan

1 Answer

How to tell if dimmer switch is out


Sounds like the multi-function switch is faulty.

Oct 25, 2012 | 1998 Dodge Ram 1500 4WD

1 Answer

The right rear blinker light won't work, after replacing it and checking the fuses


These trucks are famous for faulty rear light circuit boards.Replace the circuit board.

Dec 02, 2011 | 1997 GMC Sierra

1 Answer

Where is the heater and turn signal relay located 1992 caravan


These are seperate fuses and seperate turn signal falsher which evenually go into the same wiring. See my answer to your previous question. Good luck and hope it helps.

Jan 19, 2009 | 1992 Dodge Caravan

1 Answer

Blinker


hi i presume you mean your indicaters won,t work since you changed your headlights firstly are the headlights the same as you took out and the wiring connectors the same and what do you mean the indicators don,t work example none of them they run to slow/quick its just the front ones just let me know and we will see if it can be put right yates210456

Sep 17, 2008 | 1994 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

944 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...