Question about 1992 Daihatsu Rocky

Open Question

Diesel engine daihatsu

Hello what are the torque settings to tighten head down on a 2.8 daihatsu diesel

Posted by on

4 Suggested Answers

  • 98 Answers

SOURCE: how to rebuilt the cylinder head of daihatsu charade 3 cylinder engine

Which motor?

Posted on Sep 04, 2008


  • 840 Answers

SOURCE: Engine torque settings VW lt 35 1993 2.4 turbo diesel. Code ACL

bob go to collsionrepairadvice.com and I will send the download to you its a big file

Posted on Mar 13, 2009

c17hydro
  • 2984 Answers

SOURCE: cylinder head torque settings 1990 2.6L isuzu motor

From front to back is this:


7 3 1 5 9



8 4 2 6 10



First torque value is 58 ft lbs.....then final torgue is 72 ft lbs.

Posted on Mar 21, 2009

  • 1 Answer

SOURCE: toyota 4k torque settings

torque setting for crankshaft,head,rocker,

Posted on May 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HEAD BOLT TORQUE SPECS FOR MITSUBISHI TRITON 3.2 DIESEL 4M41U ENGINE - THANK YOU


there's no one torque setting. there's multiple stages and a sequence you have to do it in. usually finger tight, then tighten to a torque setting spiraling out. then torque it further so many degrees.
check the pajero 4m44 forum for exact specs. got manual at hm. have look later.

Jun 28, 2016 | Mitsubishi Cars & Trucks

1 Answer

The cylinder head torque settings on a nissan cabstar diesel 2010


Head Torque settings (Don't need to renew bolts)

Stage 1, Tighten 39-44 Nm
Stage 2, Tighten 54-59 Nm
Stage 3, Tighten 90 degrees

Jun 26, 2016 | Nissan Cars & Trucks

1 Answer

F77 2.8 diesel non turbo.1989 model.require head bolt tensions,stages and sequence please


Search Results

    F77 2.8 diesel non turbo.1989 model.require head bolt - Fixya

    www.fixya.com/cars/t25792470-f77_2_8_diesel_non_turbo_1989
    Jul 22, 2015 - f77 2.8 diesel non turbo.1989 model.require head bolt tensions,stages and sequence please - Daihatsu Rocky question. ... Torque to yeild bolts need to be replaced whenever the head comes off.....Long bolts are 46 ft lbs. and ...

Jul 22, 2015 | Daihatsu Rocky Cars & Trucks

2 Answers

What is the cylinder head bolt torque settings fir a 4g69 mitsubishi engine ?


BOLT INSTALLATION


Apply engine oil to the thread of the bolts and to the washers.
Tighten the bolts to the specified torque, using the tightening sequence shown.
Tightening torque: 54 ft-lb +/- 2 ft-lb
Loosen all bolts fully in the reverse order of tightening.
Re-tighten the loosened bolts to the specified torque in the tightening sequence shown.
Tightening torque: 15 ft-lb +/- 1 ft-lb
This step is to make it easier to ensure you are making 90 degree turns. Make a paint mark across each bolt head and cylinder head.
Tighten the cylinder head bolts 90 degrees in the specified order.
Tighten the bolts another 90 degrees in the specified order and check that the paint marks on the cylinder head bolts are aligned with the paint marks on the cylinder head.
Link to the guide for this engine: http://www.mivec.co.nz/tech/4G9x_Engine_Manual.pdf



Aug 04, 2014 | 2007 Mitsubishi Outlander 2.4

1 Answer

How many stages and what neuton meters are there for tightening head bolts?


Read this:

http://www.scribd.com/doc/52122956/Toyota-Landcruiser-Engine-Manual-2H-12HT

Aug 02, 2014 | Toyota LandCruiser Cars & Trucks

1 Answer

Final torque settings for nissan navara d22 diesel engine cylinder head


You do not need to re-torque modern cylinder heads. That went out withe Buffalo.

Nov 07, 2012 | Nissan Cars & Trucks

1 Answer

We need valve clearances, timing setting plus all bolt torque settings for Daihatsu DL N/A Diesel Engine (Rocky)


go to warfs.org it is a rocky owners site that has free manuals. I have a 90 rocky and this web site has been a valuable source of information for me.

May 10, 2010 | 1990 Daihatsu Rocky

1 Answer

Need to get the torque settings for the head (am replacing gaskets)also settings for timing belt 1995 daihatsu 3door 3 cyl


YOU HAVE TORQUE IN 2 STEPS.FIRST TORQUE IS 39 FT LBS THEN. SECOND TORQUE WHICH IS FINAL TORQUE. 47 FT LBS.I COULDNT FIND TIMING BELT SETTINGS.YOU PROBABLY HAVE TO BUY A HAYNES MANUAL FOR TIMING BELT SETTINGS.

Jan 05, 2010 | 1992 Daihatsu Charade

1 Answer

I need the cylinder head torque settings for 1997


1998 Hyundai Lantra "G4GM" engine 1795cc.there are two heads or blocks, one is called the M10, other is the M12, figure out which one you have cause the torque is different for stage one by 5nm........... Dont get confused theres 2 different engines so 2 different torques for stage1---------
heres the full details: Stage 1 - m10 = 30nm / m12 = 35nm-------------------------- -------- Stage 2 - tighten by 60-65 degrees ------------ stage 3 - tighten by 60-65 degrees. no sequence is given in the data book for tightening so go off what you thinks right, it doesn't matter on this engine.

Nov 17, 2009 | 1997 Hyundai Elantra

1 Answer

I am rebuilding 3cyl diesel daihatsu engine from a 1990 charade cs and require the head torque and valve clearance


you will need a manual for this as diesel torque settings are different to that of a petrol engine.

Jul 17, 2008 | Daihatsu Charade Cars & Trucks

Not finding what you are looking for?
1992 Daihatsu Rocky Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...