I have a 1995 grand marquis Ls I power washed around the oil pan. When I was done I found a washer that looked like a snap ring on the ground. The od is 1 9/16 INCH. THE ID APROX 1 IN. The id has tabs that makes it look like a snap ring of some kind. it appears to be solid like a regular washer on the diameter. There are no holes that you would put a snap ring tool into to install. Can you tell me what it came off of so I can replace it before something falls apart.

Best site for repairing cars
http://www.ptdoityourself.net/tl/tl_indexmain.html


http://www.2carpros.com/kpages/auto_repair_manuals.htm

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800cc71c



hope this may help;

Regards,
VOTIT

1995 grand marquis has a many parts containing washers. its not easy to identify. dear, u have to concern about it to a mechanic because its a time wasting thing to do it yourself dear.

regards,

Hi,

Does it look something like the image below?

If no, pls reference this page or this to identify.

If yes, then form initial appearance, said washer is general purpose and could and would be used in most big bolts. It could be the lockwasher for:

• engine mount/support;
• or any of the numerous bolts that it would fit.

Nah it cant just fall off some were so i would say it was leftin the engine bay and finally come out ,,,

It may not be usefull but you can keep it some where to remember if you need later.

Please use this link :

http://www.autozone.com/addVehicleId,1987802/initialAction,repairGuide/shopping/repairGuide.htm?pageId=0900c15280075719


Good luck...

I recomend try to show at any Autopart store. Or autorepair shop. Because if I can't see it. Is impossible to know exactly where they come. Maybe just was left in the engine. for an other guy. or mechanic.

Or you can send a picture. to try located the posistion of the washer. If is Aluminum or plastic. Is for the oil drain plug.

I hope this help on your question.

That size washer it look like the the snap ring that hold the seal in the stering box pitman arm seal kit maybe it was change before and the snap ring was left on the frame thanks pierre

Could it have been a washer for the oil drain plug?
Thanks,
Lee