Question about 2004 Dodge Sprinter

2 Answers

HI GOT PROBLEM, MERC SPRINTER 311. MACANIC SAYS CANT GET INJECTERS OUT TRIED WITH 2 DIFFRENT KIND OF TOOLS, HE SAYS THERE WELDED IN, I THINK HES GIVE UP.ANY SOLUTIONS PLEASE.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have had the same problem. I tried soaking it with almost everything. The best solution is kroil. Apply kroil once a day for a couple of days. Minor tapping helps as well.

Posted on Oct 29, 2008

It's like there welded in. but you have to spray P B blaster ( a pennatrant) let it soak for about 3 days and they should come out

Posted on Sep 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I find the code for the radio on a merc sprinter 311 cdi 2003


its not on the vin plate its available via a main dealer only you will need the vin plate to identify

Nov 30, 2014 | Mercedes-Benz Sprinter Cars & Trucks

1 Answer

I have a merc sprinter 311 cdi luton and it doesn't rev more than 3000 when idling or travelling and has no go in it whatsoever, do you think this could be an exhaust valve problem ?


i would suspect the turbo as these vehicles give exactly the problem you describe if the turbo pipes are split or broke ,also the turbos do pack up after a time as well and i have changed quite a few over the last few years and its not a job for the faint hearted as its extremely awkard to say the least but not insurmountable

Feb 15, 2011 | Mercedes-Benz Sprinter Cars & Trucks

1 Answer

Reset service indicator in a sprinter 311 cdi


One way I know of is this........although this may be be for an earlier year.

1) Put the Key in the # 2 position .

2) Hit the "MI" button on the dash twice .

3) Put the Key in the # 0 position (key out position) within 10 seconds of hitting the
MI Button .

4) Press the MI Button and turn the key into the # 2 position at the same time. There will be a confirmation noise .

5) Release and your all done.

We'd like to know if this worked for you please. So would you respond if it did?
many thanks.

dk

Jan 08, 2011 | 2010 Mercedes-Benz Sprinter

1 Answer

Need to reset service indicator on a mercedes sprinter 311 cdi 2006


A little acrobatic exercise for you............

1/ Put the Key in the # 2 position .

2/ Hit the "MI" button on the dash twice .

3/ Put the Key in the # 0 position (key out position) within 10 seconds of hitting the MI Button .

4/ Press the MI Button and turn the key into the # 2 position at the same time. There will be a confirmation noise .

5/ Release, Smile...and be on your way, your all done. !

Jan 08, 2011 | 2010 Mercedes-Benz Sprinter

2 Answers

Need belt Fan diagram for a 2000 model mercedes sprinter van


The serpentine belt routing diagram for a 2000 Mercedes-Benz Sprinter 208 CDI, 2.2 liter, 60 kW (82 BHP) OM 611.987 engine code:

1. Without A/C (Air Conditioning) system:

tdisline_145.jpg

2. With A/C (Air Conditioning) system:

tdisline_146.jpg

Please do rate my response. Thanks!

Jan 06, 2011 | Mercedes-Benz Sprinter Cars & Trucks

2 Answers

Can u set the injector timing on a sprinter van using a dial gauge in the no 1 injector at the rear of the pump and if so what are the settings please


hi, yes you can,cant remember exact figure think its 0.9mm, use the bolt above where the spline enters the block to adust the timing by ear-give merc a ring for the exact dial gauge setting as it is different for each engine.

Nov 08, 2009 | 1993 Mercedes-Benz Mercedes Benz 300 Class

1 Answer

Sprinter gear selector


This is the gear linkages. It is a cable operated system to allow the gear lever to be dash mounted.

They are a common fault. The parts are about £65 from Mercedes (dealer only part) and unless you know what you are doing you can expect about 2 - 3 hours labour charge, though there are no special tools involved.

They average about 60,000 miles, though the replacements tend to be better.

Jan 10, 2009 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

1 Answer

Spanner symbol on dash, and pinging when turning ign on


try; 1. Switch off the engine and turn off the key 2. Turn the key on second level just before cranking and press M button twice 3. Within 10 sec, turn key off 4. press and hold the M button 5. Swith on the key and keep holding M button 6. Wait until hear buzz sound 7. release the buttin

Dec 06, 2008 | 2007 Dodge Sprinter

5 Answers

ECU ENGINE CONTROL UNIT MERCEDES SPRINTER


Hi have a 411 cdi Merc Sprinter, when rev past 3000 engine cuts out, will start again no problem.

Aug 03, 2008 | Dodge Sprinter Cars & Trucks

Not finding what you are looking for?
2004 Dodge Sprinter Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...