Question about Chevrolet Cavalier

2 Answers

I need the diagram to install the serpentine blet for a 2002 chevy cavilier 2.2 with air

Posted by on

  • killerdollar Oct 19, 2008

    need correct serpentine belt route

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

i need the diagram to - 2_10_2012_1_25_06_am.gif
Hope that helps :)
and i **** at paint so if theres any clearing up needed please ask

Posted on Feb 10, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 60,741 Answers

There is a sticker with a diagram under the hood, look near the emission sticker or on or near the belt side of the engine. If the belt is still on the engine take a digital photo before you remove it if you can't find the sticker

Posted on Jul 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt routing for a 2002 Dodge stratus


If you click HERE it will take you to a pdf serpentine blet routing guide book put out by Dayco Belt. Please allow time to load, it is a large file.

Dec 12, 2011 | 2002 Dodge Stratus

1 Answer

Need to find diagram for 2002 ford focus serpentine belt tensioner


Assuming the car is equipped with AC, your diagram is 1 of these.


2002 Focus Serpentine #1


greg_margo_22.jpg

2002 Focus Serpentine #2

greg_margo_23.jpg

Jul 30, 2011 | Ford Focus Cars & Trucks

1 Answer

I need a serpentine belt diagram for a 2005 chevy 3500 express van


When I bought a new belt for my Jeep, the Auto-parts store furnished me a diagram, specific for my vehicle, and how it is equipped (air cond. etc.)
I dealt with NAPA auto parts, but any good parts store in your area should do.
You may also be able to find one online.

Jun 11, 2011 | 2002 Chevrolet Express

1 Answer

I need the serpentine belt diagram for a chevy Express Van


DRIVE BELT DECAL SHOULD BE UNDER THE HOOD.OR YOU CAN GO TO DEALERSHIP GET ONE AUTO ZONE OR ADVANCE AUTO PARTS CAN GET YOU ONE.OR YOU CAN BUY A HAYNES REPAIR MANUAL IT HAS BELT DIAGRAM.

Mar 10, 2010 | 2002 Chevrolet Express

1 Answer

How do you replace a serpetine belt on a 2002 chevy tahoe


My sincere apologies for the severly delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it in case you still do.


Click on the following direct Link. It has the Serpentine Belt Diagram for the 2002 Chevy Tahoe for your specific engine and options (AC/No AC etc.). It has other additonal diagrams for your future use. It also has some diagrams on how to rotate/move the Tensioner Pulley/Arm to loosen and remove the Belt.

Standard Rules to Removal the Serpentine Belt:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT OR OPENING (3/8ths or 1/2 inch square opening) rotating it\moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.

Standard Rules for Installing the Serpentine Belt:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.

b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2002/make/chevrolet/model/tahoe/2002_chevrolet_tahoe_drive_belt_routing_diagram.htm

Feb 22, 2010 | 2002 Chevrolet Tahoe

2 Answers

Puma 1.4 belt diagram


HOPE THIS HELP ONE BELT ROUTING
Regards Paul
www.limotec.co.uk
e57e721.jpg

Jan 11, 2009 | 2003 Ford Escort

2 Answers

How to remove a 2002 chevy cavilier headlight if u got a diagram it would be nive


there should be 2 bolts that you remove from the top and it should just slide out from there let me know if this helps

Dec 27, 2008 | 2002 Chevrolet Cavalier Coupe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...