Question about 1992 Chevrolet Lumina

1 Answer

Brake lights don't some of the time, center light works, turn signal works

Need help brake lights are not working almost all the time

Posted by on

  • johnhenrykan Jul 28, 2008

    where is the relay for the brakes on the 1996 Chev Lumina /

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 75 Answers

The relay for the brake is not proper and the connection is not healthy so check the relay first which can rectify your problem

Posted on Jul 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1984 chevrolet silverado high beams lights works and low beam lights, turning lights, emergency light and brakes lights don't work. I need help!


Those lights are on different circuits. The high and low beam lights are powered thru the headlight switch, the turn signals, brake, and hazards go thru the turn signal switch.
I would want to know if each circuit has power at the switch that controls it.

Jun 28, 2013 | Cars & Trucks

1 Answer

Rear brake lights not working on 1998 Chevy Lumina


Well usually when the third brake light works and the others don't, the problem is in the turn signal switch. The center brake light is separate from the other two as far as circuits go.
The thing that puzzles me is the cruise. It could be something else, because the only way a faulty brake light switch would kill the cruise control is if the switch was stuck on.
I think I would check the circuits in and out of the turn signal switch.

Aug 08, 2012 | Chevrolet Lumina Cars & Trucks

1 Answer

No brake lights, blubs and fuses ok. center brake light DOES work


Usually when the third brake light works but the regular lights don't the problem is in the turn signal switch.
I would check for voltage there.

Jul 19, 2012 | 2004 Jeep Grand Cherokee

1 Answer

Brake lights won't work.... replaced fuse it's fine, top light on hatch works, but right and left don't


need to check the multi-function switch. the brake light signal goes through the turn signal switch on the steering column. the brake lights come on if the turn signal is not being operated. the circuit for the brake light can loose contact in the switch.

Aug 12, 2011 | 2007 Chevrolet Tahoe

1 Answer

Brake lights & Hazzard lights don't work; fuse ok... High mounted center brake light works... Turn signals work...suspect problem is multifunction lever Power drain to battery constant...2...


As for the brake lights push brake pedal down while pushing on and wiggling the hazard switch.If the brake lights come on then replace the multi-function switch.

Aug 10, 2011 | 1997 Oldsmobile Bravada

2 Answers

In my rear tailights, the breaklight component is not functioning. i replaced them with brand new lights. the center breaklight located in the back window is still working. Cant figure out why they wont...


Have had this problem many time's here at my shop, if center brake light come's on which you said it does, fuse and relay are good, the problem is your turn signal switch cause the brake light circuit goes through the switch, the switch is bad even though the turn signal's still work's, good luck, hope this was evrey helpful.

May 17, 2010 | 1997 Ford Contour

3 Answers

Rear brake lights don't work , but center brake light does.


brake lights won't work, but the center does ??? u need to change your turn signal switch which is in the steering wheel. i changed mine and it worked great .....


hope that helps
s2g1

Apr 22, 2010 | 1995 Buick Regal

1 Answer

Brake light, reverse light and turn signal issues


Hello. The symptoms you are describing are likely due to a poor ground. Temporarily install a new ground wire by securing a piece of copper wire to the frame with a self tapping screw. Use this ground wire along with the hot wire to see if each of these lights works. If it does, trace the ground wire back to the frame, unscrew it and clean up the metal with emery cloth so you reestablish a good ground.

Jan 28, 2010 | 2003 Ford Windstar

6 Answers

No rear brake light / turn signals on 2001 Chevy Cavalier


The problem is the turn signal/headlight/hazard switch assembly on the steering column which the brake light wiring runs through. The part is easy to change and cost about $50 at most parts stores

Jul 05, 2008 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
1992 Chevrolet Lumina Logo

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

68038 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22011 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...