Question about Chevrolet G20
Take of the wiper arm (its locked with a little metal piece.) Take a way the wiper (make a mark so you now where to put it back. Take away the grill on the topp so you later can reach part of the
motor. Take of 0 on the battery. Detach the electric connection to the motor. Relase the three scruws that holds the motor to the body.
En unscruw partly the two wiper arms and you can release the motor.
Posted on Aug 08, 2008
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Rear Windshield Wiper Problems
Check the wiper motor connection if its touching anything and loose it will automatically ground out and check at connection make sure you put some gel and then snap it in/ Please rate my response thank you very much
Posted on Jan 31, 2009
SOURCE: Windshield Wiper Arm
Pull up on the wiper arm, you will see a tiny little blade on the side of the wiper arm where it goes over the post, take a little screwdriver and pry that out board, this will release the arm from the post, it will be tight, wiggle the arm and pull straight out away from the post.
Posted on Oct 19, 2008
Hello jlwhelchel: My name is Roger and I will answer your question. Raise the hood locate the wiper motor. Remove the cover held on by three screws. Remove the cover. The cover is the module.
Should you need further help please just ask. Please rate the answer. This way I know the information was helpful. Thank You for using Fix Ya. Roger
Posted on Oct 16, 2009
Tips for a great answer:
Aug 05, 2017 | Cars & Trucks
Windshield wiper system module / motor
Windshield washer fluid pump
Windshield washer fluid level switch
Instrument panel cluster (IPC)
ACC 15-amp fuse
WSW 30-amp fuse
Jan 04, 2016 | 2002 Pontiac Bonneville
Mar 21, 2015 | 1999 Pontiac Bonneville
Feb 20, 2015 | 2007 Ford Mustang Coupe
Nov 17, 2014 | Cars & Trucks
Jan 31, 2018 | 2005 Buick Century
can be faulty wiper motor or blown wiper control fuse.
you hear any kind of noise when you starter the wiper function. If yes then
fuse is ok, but issue is wiper motor.
no movement at all and no noise then its blown fuse or shorted/loose wiper
control wiring: -----
complete troubleshooting i suggest you few helpful links with accurate
the link below: -------
1993 Ford F350 wipers not working?
How to Replace a Windshield Wiper Motor
Wipers not working, but hear relay click on Lincoln LS?
Car windshield wiper gets power for movement and stops?
How does cars Windshield Wiper System Works
1997 Honda Protege: Replace Wiper Transmission?
Windshield wiper fluid container leaking?
Where is wiper fuse located on1993 chevrolet suburban
2002 Toyota Sienna: Wipers and Passenger side Power window
Complete wiper components replacing details for Acura Car
These details will help.
Nov 29, 2012 | 2003 Chevrolet Cavalier
Jun 07, 2010 | 1998 Saturn SL
Jan 04, 2010 | 1983 Ford Ranger
May 01, 2009 | 1999 Lincoln Town Car
2,559 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: