Question about 2001 Ford Taurus

2 Answers


Posted by on

  • 2 more comments 
  • wagamanjaws Aug 17, 2008

    my check engine light is on. will not go off. had it checked several times replaced everything said wrong and still will not go off. mechanic stumped. will not pass emissions because off. please help!!!!

  • Anonymous Sep 30, 2008

    i have the same problem! im no car expert or anything as ul now see but, catalic converter, spark plugs, and something that i think he said was a lampeter has been replaced... no success... keeps coming back on!

  • Anonymous Oct 15, 2008

    My Check " Engine Light" is also on and will not go out. I've checked all fluids and hoses. I did not start having this problem prior to the gas at the pump change: " This Gas may contain up to 10% Ethenal". This can only be my contributing factor. However, I'm also not a machnic either.

  • lrrybraziel May 11, 2010

    check engine light and air bag light is on also



2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I look up the code for you and It says that p2285 Injector control pressure circuit low.

Posted on Nov 11, 2008


I have had same problem for over a year. Car runs great. Only thing mechanic said indicated oxygen sensor was reading at 80%

Posted on Nov 07, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I clear a P2285 code on a 2003 ford f350?

Have you diagnosed that code & replaced the failed
sensor, before you break down somewhere?

Have you not looked up the codes

There is lots about it on the internet


Seems it takes about 3 to 4 hours to get to it

You can use a code reader to clear all data,
then you got nothing to work with, to diagnose
the problem

The MIL Lamp will come back anyway, until you
resolve the problem

Oct 02, 2014 | Cars & Trucks

1 Answer

So how can i reset p2285

The ICP code just went through this a minute ago. Reset the Computer take off the positive terminal about 24 hours to reset the PCM that should get rid of the code. It's not one to ignore I hope you have fixed the problem.

Jun 10, 2014 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

P2285 code 6.0 litre ford deisel long cranking before starting after starts runs great but oil pressure gauge drops at idle

bad bearings on crank or worn oil pump. Pressure will be up when cold, but will drop when engine warms up. Check for knock in lower end. If so, bad crank bearings.

Jan 16, 2013 | 2004 Ford Super Duty F 550

1 Answer

Ford diesel trouble code 2285. What is it?

P2285 - Injector Control Pressure Sensor Circuit Low

Open circuit, short to ground, ICP sensor; the ICP sensor is behind the turbo, it has been known to get an internal leak of oil and go need an 1 1/16 crows foot wrench to remove it. Just replace it (also check connectors).

Hope helps to solve it.

Nov 09, 2010 | Ford F-250 Cars & Trucks

1 Answer

Do you know how to fix the code - P2285 (ICP) on a 2003 Ford 350 6.0 diesel truck

DTC P2285 indicates the injector control signal circuit is out of range
so its either the ICP sensor located ontop of the passenger valve cover
or an open or shorted wire between the pcm and icp sensor

Jan 26, 2010 | 2003 Ford F350 Super Duty DRW SuperCab

3 Answers

Injection controll pressure sensor

need engine size, then i can help. get back to me Thanks Ray

Dec 15, 2009 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

2003 Ford F350 6.0L check engine is on.... diagnostic code is P2285.. Describe as Injector control, pressure sensor, circuit low... What is this??? help please...

it is probably the injector control pressure sensor in the rear of the engine they leak into the connector and cause this concern replace the sensor and install a connector repair kit

Dec 07, 2009 | 2003 Ford F350 Super Duty DRW SuperCab

Not finding what you are looking for?
2001 Ford Taurus Logo

Related Topics:

457 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77939 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5651 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides