Question about 1995 Nissan Quest

2 Answers

Transmission overdrive Problem

Hello;
My 94 Nissan quest will not shift into overdrive unless I am slowly accelerating or going up a slight incline. It happened after I did a tune up and floored the accelerator to test acceleration. The trans seems to shift fine otherwise. I changed the fluid and filter because it was about time anyway and wanted to see if it would make a difference but it did not. The OD button on the shifter does work. Maybe the bands just need adjustment or a faulty sensor? Hope you can help. Thanks!


Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 4,369 Answers

You need a tps or adjust it. throttle position sensor .

go here for help

http://autos.groups.yahoo.com/group/villagerquest/

Posted on Mar 15, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The overdrive on the Nissan Quest is ONLY designed to work when you're accelerating up an incline. So you have no issue. Read the owners manual, and you'll see that I'm right. Have a great day, and have fun on them inclines. ;)

Posted on Mar 31, 2009

5 Suggested Answers

maklean
  • 1665 Answers

SOURCE: Hyundai Overdrive wont engage

It is not suggested strip and twist wires. Better take it to an authorized service station to check what causes the problem.Is it OVERDRIVE SWITCH or CRUISE CONTROL MODULE faulty?
Over drive switch has three points. (5 to 4 selects "ON" or 5 to 6 selects "OFF").
Right click on following schematic, "save picture as" to a location in your PC so you have a ZOOM IN view.


CRUISE CONTROL SYSTEM SCHEMATICS
923a890.gif

Posted on Jun 29, 2008

RJones1125
  • 373 Answers

SOURCE: 1989 lincoln mark vll automatic transmission

you may have damaged the overdrive gear, a local transmission shop would be your best bet. for good troubleshoting and estimate.

Posted on Mar 09, 2009

RamTek
  • 377 Answers

SOURCE: '94 Protege's auto trans: no overdrive, poor automatic upshifting

Suggestion try to check if the release bearing of the transmission is still ok and check also the transmission oil level and if you need to change the transmission oil.

Posted on Jun 09, 2009

  • 540 Answers

SOURCE: 2000 LUMINA 3.1 W/4T60E OVERDRIVE WON'T RELEASE ON

you can disconnect the main connector on drivers side top of trans it might help, but really needs to be diagnosed, and repaired, probably a faulty tcc solenoid..

Posted on Nov 29, 2009

  • 170 Answers

SOURCE: I have a 1985 toyota pickup auto trans w/od 4

OVERDRIVE BAND IS BROKE OR TRANNY FILTER IS CLOGGED PULL PAN IF ANY PCS OF BAND ARE PRESENT YOU NEED A REBUILD

Posted on Jun 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Misses badly when accelerating or under a load. shift out of overdrive on incline due to power loss


Have you checked for codes?

Any dash lights lite?

Any testing done so far?

Have to do something then tell us,can't
guess and don't have the car to drive.

You most likely have ignition issues,if the
engine is hot & your going up hills

It down shifts based on shift strategy & vehicle
speed & many pcm inputs from sensors

Could be egr issues

Do you ever do any preventative maintenance?

Nov 26, 2012 | Cars & Trucks

3 Answers

LATE SHIFTING FOR NISSAN TERRANO


Check transmission fluid after driving for a while, this could be down a bit. If 4 wheel drive, make sure it's in 2H.

Jul 16, 2009 | 1999 Nissan Pathfinder

1 Answer

Nissan Quest 1994 Overdrive Problem


if you leave the O/D off, what happens?

Go here and read files too.


http://autos.groups.yahoo.com/group/villagerquest/

Jun 09, 2009 | 1994 Nissan Quest

1 Answer

Overdrive button on shift knob doesn't work


Most likely the turning on and off might have trigered or burned out your relay switch located in the front of your engine. The overdrive button on your nissan was only ment to be used sporadically and not as a stick vehicle ( According to your expression ). You can purchase this relay in your nearest nissan dealer. Good luck.

Sep 11, 2008 | 2005 Nissan Quest

2 Answers

2004 nissan quest idles rough when van is stopped


Have 2004 Nissan Quest. After 40 mph Van runs rough and there is a loud rattleing noise that sounds like an old 4 bbl carb waaaah, but ther is no code

Aug 14, 2008 | 2004 Nissan Quest

1 Answer

Hard shift and blinking overdrive


The blinking overdrive button is telling u that a serious fault has occurred in the electronic controls or a mechanical fault such as excess slippage is occurring.

Jul 16, 2008 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
1995 Nissan Quest Logo

1,636 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...