WIRING DIAGRAM TO FIT FACTORY ELECTRIC WINDOWS TO AE92 COROLLA

It says the tachometer wire is Yellow/Green, you do not have that listed. You will find it in the list below, it is highlighted..

WIRING INFORMATION 2001 Subaru Legacy

WIREWIRE COLOR LOCATION

12V CONSTANT WIRE WHITE Ignition Harness

12V IGNITION WIRE GREEN Ignition Harness

12V ACCESSORY WIRE YELLOW Ignition Harness

STARTER WIRE WHITE/BLACK Ignition Harness

POWER DOOR LOCK (-) WHITE Harness In Driver's Kick Panel

POWER DOOR UNLOCK (-) GREEN/RED Harness In Driver's Kick Panel

PARKING LIGHTS (+) ORANGE At Light Switch

DOOR TRIGGER (-) PINK/BLACK In White Connector Behind Fuse Box

TRUNK TRIGGER (-) YELLOW/BLUE In White Connector Behind Fuse Box

TRUNK RELEASE (5-wire) LT.GREEN/YELLOW At Motor In Tail Gate

FACTORY ALARM ARM (-) Factory remote only

FACTORY ALARM DISARM (-) Factory remote only

TACHOMETER YELLOW/GREEN At Ignition Coil

BRAKE WIRE (+) WHITE/BLACK At Brake Pedal Switch

HORN TRIGGER (-) RED/GREEN Harness At Steering Column

LEFT FRONT WINDOW UP BLUE/RED At Driver Window Motor Inside Door

LEFT FRONT WINDOW DOWN BLUE At Driver Window Motor Inside Door

RIGHT FRONT WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door

RIGHT FRONT WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

LEFT REAR WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door

LEFT REAR WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

RIGHT REAR WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door
RIGHT REAR WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

Has to be on your wiring diagram, if your using
as built factory ones

Any other manuals are not worth having or working with

That is not as uncommon as you may think
Mabybe it was used at the plant that builds the harness
for the manufacturer

I'M SORRY BUT DUE TO COPYRIGHTED MATERIAL WE DO NOT HAVE WIRING DIAGRAMS. YOU CAN DOWNLOAD THEM HERE FOR A SMALL FEE.

You will need the factory wiring diagrams. We do not have them due to copyrighting. You can buy the factory wiring booklet HERE, a must have for doing your own electrical trouble shooting and worth every penny.

the first would be the car might be leaking from the exhaust change the exahust gasket and catalytitc converter then it will pass

Seems that you wants to replace your original cluster for another. One solution is,go to any auto parts,look on the manuals section for your particular car.then kindly ask the manager to make a copy of the dash cluster. If you are lucky enough you may be able to find booth diagrams. go from there.

all the wiring diagrams can be found here for free.
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528006f4db

hope you get it solved.

Ps dont forget to rate the solution. Thanks

im pretty sure these cars were already prewired for fog lights .there should be some plugs behind the bumper to fit them.if not get back i will explain how to wire them up.best of luck.

you should never cut the wires on your factory harness... metra and other companys have harnesses that fit your car and would provide you with a correct wire color code you need to hook up a aftermarket stereo keep that in mind but i will post the wire diagram u are looking for

use muti tester for safe installation