I would like to know how to replace the entire hatch on a 97 Jeep Grand Cherokee Laredo

Transmission sticks in reverse- won't go into park. - JeepsUnlimited

www.jeepsunlimited.com/forums/showthread.php?...won-t-go-into-park
Jun 14, 2013 - 12 posts - ‎5 authors 2003 6 cyl 4x4 Grand Cherokee Laredo automatic- Occaionally, when shifting from REVERSE TO PARK, my Jeep will stay in reverse. Typically its ... '2001 WJ'4,0L'42RE'NV 242'380000 km'ECE Compliant' ??????????? ??? ...

2001 jeep grand Cherokee laredo - CarGurus

www.cargurus.com > Questions > Jeep > Grand Cherokee
CarGurusJan 27, 2014 - 2001 jeep grand Cherokee laredo - Just purchased a 2001 Jeep GrandCherokee Laredo and ... It starts in PARK sometimes and sometimes it won't and I have to start it in Neutral. ... Hatch shuts flush, but won't stay shut. help!

first is diagnosis.
you examine and test it. to see if its electrical or mech. failure.
and once discovered that follow that to logical conclusions.

I am only replying as I also have the same vehicle and in order to get those light bulbs on mine I have to open the hatch and then remove the danged (entire) light assembly to get at it. Changing it in and out of the assembly only takes 20 secs. Getting at it takes 15mins at least. Have fun and good luck with it.

its possible you dont have the right key. some vehicles were made with a valet feature, door key only works the door and ignition switch but not hatch

1998 Jeep Grand Cherokee 5.2 Liter And 5.9 Liter Serpentine Belt Routing try this link http://autorepair.about.com/library/pictures/illustrations/bl750a-lib.htm

Check your throtle postition sensor. It monitors what postion the throtle is at and sends that info to the ecm. It will go bad and cause that problem.

You need to remove the panel from the liftgate and unlock and open it manually at the latch. It is not fun, but you can get the panel off with the hatch closed.

The hatch release button in located on the rear hatch door. The hatch release for the entire door is a lever located under the license plate. The hatch release for the window is located above the license plate.

a slim jim is not a good ideal to be using in todays cars and trucks with airbags everywhere and wires inside doors..call a pro and if he pulls out a slim jim send him packin...there a re far better tools to use than a slim jim

My 97 cherokee catalytic converter was stolen, oxygen sensor wires cut. the replacement is black, grey and white. the jeep is different color. i need help knowing which wires get connected to which.