Question about Peugeot Liberte

Open Question

PEUGEOT 206 CC WARNING TONE

GETTING A HIGH TONE NOISE WHEN DRIVING AND STOPS WHEN I PULL UP , ENGINGINE IS STILL RUNNING MY FRONT PADS HAVE BEEN SQUICKING AOLT LATELY, THE NOISE SOUNDS LIKE A WARNING TONE

CAN ANY ONE HELP

PEUGEOT 206 CC

Posted by on

6 Suggested Answers

thutson66
  • 96 Answers

SOURCE: i hear squicking in the

Could be strut mounts needing to be replace. What year modle and what is the milage?

Posted on Jul 31, 2008

  • 84 Answers

SOURCE: brake warning light on,beeper sounds when car is driving

Sounds like the sound when you leave the handbrake on. The same light as the low brake oil level will come on with the handbrake. And the warning sound coming from the cluster will come on if you leave the handbrake on and start driving to warn you that you left it on. Guessing your handbrake is not on and that your brake level sensor on the master cylinder is good (on the cap) check your handbrake switch and the wires there. You can unplug it and try it like that or you might have to bypass the 2 wires in the connector together. I can't remeber if with the handbrake on if it closes the circuit or the opposite. Once you have the connector in your hand you can unplug it with the car running and see if the light goes off. If not you can jump the 2 wires and see then. Or just check the switch isn't staying stuck. You'll see more once the handrake console is off. Just look around the mechanism of the handbrake and you'll find the switch.

Posted on Nov 20, 2008

  • 274 Answers

SOURCE: how to turn off the airbag on peugeot 206 1.6

there should be a key switch inside the car somewhere you need to turn it to the off position with the ignition key
(it will probably be some where on the dash, in the glove box or center console)

Posted on Dec 08, 2009

Danniboi
  • 1098 Answers

SOURCE: Peugeot 405 SRi: brake pad warning light came on;

Hi Chris
Is there plenty of fluid for the nrakes? they should have little wires coming from the brake pads , normally once you have replaced the pads this light would go out automatically.

It may not be your pads that triggered the light.

Hope this helps
Regards
Dan

Posted on Feb 08, 2010

  • 1 Answer

SOURCE: fuse box diagram peugeot 206

My car Lights all seem 2 b going slowly. dashboard went first and i keep changing the fuse for it and it will work for 3days or soo and then blow dont kno what the problem is? and then yday i fount out that my horn doesnt work now and my rear fog lights dont work, break, reverse and indecate still works... what could b the problem??

Posted on Feb 16, 2010

  • 20 Answers

SOURCE: airbag warning light stays on what does this

THE LIGHT IS INDICATING THAT THE AIR BAG SYSTEM HAS A MALFUNCTION AND WILL NOT DEPLOY IF NEEDED YOU MUST HAVE IT SCANNED FOR THE ERROR CODE AND REPAIR ODDS ARE THAT IT HAS AN OPEN SIR COIL IN THE STEERING COLUMN

Posted on Mar 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Peugeot 206 cc is displaying Breaking fault on the dashboard but I have changed both breaking disks and pads. What might be still the problem.


it could be the ABS system, the proportioning valve in the brake system, low fluid in the reservoir.
run the fault codes to find the reason.

Mar 07, 2015 | Peugeot 206 Cars & Trucks

1 Answer

Peugeot 206 troubleshooting


It's for brake fault pads, sensors low fluid

Sep 02, 2014 | 2001 Peugeot 206 1.6

1 Answer

How many waring lights shoula come on a peugeot 206 diesel


There should be NO WARNING LIGHTS on while the vehicle is running. If ANY warning lights come on while the vehicle is running, SOMETHING IS WRONG.

Jul 22, 2014 | 2005 Peugeot 206 2.0

1 Answer

I have a peugeot 206 got knocking noise from drivers side front when driving


sounds like wheel bearing, jack wheel up, an see if there is any free play, by trying to move wheel side to side

May 16, 2012 | 2004 Peugeot 206

1 Answer

2003 Lexus es300 has high pitch squeel in front driver side tire, stops when brakes are applied or when I turn the wheel


u need front brake pads...the noise u hear is a warning sensor that is on the brake pad...it will touch the brake rotor when the brake pads r getting very low an about ready to start grinding into the brake rotors

Jul 16, 2011 | 2003 Lexus ES 300

1 Answer

My 91 sonoma (s10) ext.cab,has developed a high pitched squeal that starts after driving for a short time and stops momentarily after i touch the brakes and the starts up again. thanks


u need to replace the front brake pads..the noise u hear it the brake pad warning indicator tell u ur brake pads are about to start grinding into ur brake rotors.....

Jul 16, 2011 | 1991 GMC Sonoma

2 Answers

Hi I own a peugeot 206 gti 180. It has recently


Check the drop link and sway bar (anti roll bar) bushes also the knock could be in the strut top or the strut itself, maybe disconnect the drop link to the sway bar and drive over a pothole and see if the knock is still there.

Jun 05, 2010 | 2005 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...