Question about 2001 Mazda Tribute

3 Answers

Car stalls after start but will run if accelerator is held down?

Posted by on

  • Anonymous Aug 02, 2008

    I start my Mazda Tribute but as soon as you let off accelerator it dies? What could be problem?

  • PRLONG41 Oct 09, 2008

    i HAVE THE SAME PROBLEM. i PURCHASED A NEW ALTINATOR AND A NEW BATTERY AND MY CAR STILL STALLS. i READ THE INFO ABOUT THE FAST IDLE SWITCH BUT I DONT SEE ANY PART BY THAT NAME. DOES IT HAVE ANOTHER NAME?

×

3 Answers

Fast Idle switch needs to be replaced. I have done this around 100,000 works fine now.

Posted on Oct 03, 2008

I had this same problem. I took apart the air intake and cleaned the sensor. I also replaced the air filter at the same time. Worked for me.

Posted on Aug 06, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 42 Answers

Idel screww is set to low

Posted on Jul 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stalled during acceleration


Keith, PLEASE !!!!!!!!!!!!!!!!!!!!!! TELL US ON WHAT

Sep 21, 2014 | Cars & Trucks

1 Answer

Car running rough at random when accelerating and also idle drops suddenly when slowing down and often completely stalls out when I stop. Smells strongly of gasoline when it stalls/almost stalls but I


This could be a lot of things. one of the tests that you need to run is shift it into nuetral when you are stopping and see if it still drops RPM and wants to stall. This will eliminate or conclude that it is a transmission issue. If it is still doing this then it could be a vacuum leak or fuel delivery issue.

Feb 13, 2014 | Subaru Cars & Trucks

1 Answer

Problems accelerating


the engine tickover is too slow when the engine is cold its running on cold start, ie:choke,, after it warms up the engine slows down this is what is causing it to stall in gear,, get some one to hold the brakes hard on and with the engine running in gear ajust the tick over till its reving at 750 - 850 rpm the revs will go up a bit when its out of gear,, before you pick a gear to go into push the foot brake down to stop the car lurching,,,

Feb 19, 2010 | 1997 Cadillac DeVille

1 Answer

Engine would not accelerate, now wont start


Sounds like the fuel pump went. Check for power under the van at the gas tank for the fuel pump. You need 2 people to do this,the pump will only power up for 5 secs/key cycle unless the engine is running.

Jun 21, 2009 | 2000 Chevrolet Astro

1 Answer

STARTS & RUNS WHEN COLD BUT STALLS EVERYTIME YOU RELEASE THE ACCELLERATOR WHEN WARM


2001 dodge ram 1500 dies after releasing accelerator.runs good while accelerator is depressed.

Apr 28, 2009 | Volkswagen Jetta Cars & Trucks

1 Answer

No high idle at cold start


i had same problem check the OVP fuse located behind the battery that were mine is i have a 1990 check were yours is at if the fuse is burnt all the electronics that help you engine run are inactive check it before anything the overload protection relay

Mar 09, 2009 | 1986 Mercedes-Benz 300

Not finding what you are looking for?
2001 Mazda Tribute Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...