Question about 1994 Hyundai Excel

1 Answer

Antenna i was wondering how to replace the antenna on my 94 hyundai excel? do you have to remove the front side panel to get to it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Yes

Posted on Aug 13, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 94 Hyundai Excel. I am replacing the clutch but can't find the torque settings anywhere.


clutch/flywheel torque settings - Hyundai Forums : Hyundai Forum

www.hyundai-forums.com/...accent/146383-clutch-flywheel-torque-setti...

Aug 2, 2012 - 3 posts - ‎2 authors
Im after the torque setting for the clutch and fly wheel for a lc 2000 accent with the dohc 16v engine. cheers.Missing: .94

Torque value head bolts 1994 hyundai excel 1.5l - Fixya

www.fixya.com/cars/t12339610-torque_value_head_bolts_1994_hyundai
Apr 7, 2012 - SOURCE: torque settings for a hyundai accent 1500 1998. cylinder ...SOURCE: how d i change a clutch in a hyundai excel 1994. Hi first lift the ...

Flywheel & Pressure Plate Torque Specifications? - Hyundai ...

www.hyundaiaftermarket.org > ... > Engine, Intake, Exhaust

Dec 19, 2015 | Hyundai Cars & Trucks

1 Answer

How do i get the door opener and window winder off


I believeon a 94 excel the window crank handle has a bolt in the center with a plastic cover on the inside ..the inside door handle is fastened to the frame on the door and you have to remove door panel for acess

Feb 17, 2011 | 1994 Hyundai Excel

1 Answer

Had no auto matic adjusting lever can I put new brake shoes without replacing adjusting lever on 1994 Hyundia excel rear brake driver side


The rear brake drums are drum brakes on the 94 excel. The Excel uses the front brakes the most, so are you sure you need to replace the rear brakes?

Jan 06, 2011 | 1994 Hyundai Excel

2 Answers

Are struts on the front or back of this car?


The struts model (MacPherson Strut),are both in front and back of this car.
2000 - 2006 Hyundai Elantra Shock Absorber and Strut Assembly - Rear, Driver Side, KYB GR-2/EXCEL-G, Twin tube, Strut Assembly. $72
2000 - 2006 Hyundai Elantra Shock Absorber and Strut Assembly - Rear, Passenger Side, KYB GR-2/EXCEL-G, Twin tube, Strut Assembly $68
1996 - 2006 Hyundai Elantra Shock Absorber and Strut Assembly - Front, Driver Side, KYB GR-2/EXCEL-G, Twin tube, Strut Assembly $67
1996 - 2006 Hyundai Elantra Shock Absorber and Strut Assembly - Front, Passenger Side, KYB GR-2/EXCEL-G, Twin tube, Strut Assembly $63
Of course this is only the cartridge, you have to transfer the spring, and the top mount of the existing strut. You need a pair of coil spring compressor to do the job. The basic procedure to replace a strut is:
Remove the top nuts that secure the strut assembly to the frame mount inside the engine compartment. Do not remove the center nut.
Mark the lower strut mounting location on the hub for installation reference. The alignment will be close if the new strut is installed in the same position.
Remove the bolts that hold the strut assembly to the hub.
Remove the strut assembly from the vehicle.
Mark the top mount for installation reference. Using a side mounted spring compressor, compress the spring and remove the top nut and retaining washer. Pull strut assembly out from the bottom of spring.
Slide the new strut assembly up into the spring and reposition the top mount onto the spring in the same position that it was removed. Install the retaining washer and top nut.
Tighten the top nut to the manufacturer's specifications and carefully remove the spring compressor.
Place the strut assembly back into the vehicle.

Oct 16, 2010 | 2000 Hyundai Elantra

2 Answers

Getting fire but fuel pump aint running


Check the fuel pump relay/fuse.

Circuit Protection The fuse box is located low on the left side of the dashboard behind a cover, or at the left side kick panel, behind a cover.
Fusible links are located in a holder next to the battery.
The fuse panel is located behind a snap-off cover in front of the driver's left knee.
Fusible links are sections of wire, with special insulation, designed to melt under electrical overload. Replacements are simply effected by removing the old unit and inserting the new into the block. Fusible links are identified by the color of their housing.

Also, your fuel pump may be bad. Check the fuse/relay first.

Dec 07, 2009 | 1992 Hyundai Excel

1 Answer

Engine mount


The front mount is at the FRONT of the engine. Fair enough.

Jun 15, 2009 | 1994 Hyundai Excel

1 Answer

I have a 94 hyundai excel how do i adjust the clutch


If the clutch is WORN OUT, there is NO adjustment. If you have recently replaced the clutch (disk), the adjustment is at the master cylinder (clutch master cylinder) push rod.

Jun 08, 2009 | 1994 Hyundai Excel

1 Answer

How do you replace the front door speakers in a 1999 Model Hyundai Excel?


You have to take the door panels off.
The front speakers are 6"
So remove the front door panels, unbolt the factory speakers, bolt the new one in the existing holes, reinstall the door panels.
The grills will look factory, but you will have better speakers. Nice way to keep the good stuff hidden from prying eyes.

Oct 19, 2008 | 1994 Hyundai Excel

Not finding what you are looking for?
1994 Hyundai Excel Logo

Related Topics:

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...