Question about 1996 BMW 318

2 Answers

Oil service light

How do I turn off the "Oilservice" light on my 1991 318i?

Posted by on

  • bmwwc May 11, 2010

    what is the cyl head specs on a 316i dolphin e36 pllllllls

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 88 Answers

BMW SERVICE RESET Take a small wire, paperclip, or elect wire and bend like a horseshoe. No light or equipment necessary Open the diagnostic data port, the one were the little pacman centre is located. Turn the ignition to position 2, don?t start. Connect pin 7 always first and then pin 19. Hold for 4 seconds. Remove wire and settings will be reset. Warning if you hold the wire longer than 10 seconds you may reset inspection intervals 1 and 2. I?ve done this twice and it definitely work on my E36

Posted on Aug 05, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

×

2 Suggested Answers

  • 7 Answers

SOURCE: "OILSERVICE" message in dash on after oil change

YOU NEED A RESET TOOL IF YOU DONT WANT TO PAY TO HAVE IT DONE LOOK ON EBAY THE THE RESET TOOL

Posted on May 01, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my manint req's light after an oil change on a 2003 Honda pilot


Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.

Mar 09, 2015 | 2003 Honda Pilot

1 Answer

How to turn off service light oil change light and service spanner light on renault megane 2008 petrol


you may have to use a scanner to reset the CPU for this unless there is something in the owners hand book on how to reset after a service.

May 10, 2014 | 2008 Renault Megane 1.4

2 Answers

Reset oil light


turn ignition on (do not start) press accelerator pedal to the floor and hold for 30 seconds, let off for 30 seconds, then turn ignition off allow an additional 30 seconds and start veh. if does'nt work 1st time repeat. this sounds strange but thats how to reset the oil change light.

Aug 27, 2012 | 2004 Chevrolet Impala

1 Answer

How to turn the sevice warning light off after oil change ?


BMW Model E39 built from 1996~2000 will have a port like the one shown below. A Reset tool like a Peake R5 or R5-FCX is needed to reset the oil service or inspection service lights after required service.

1) If you have a reset tool then turn your car key to Position II but do not start the car.
2) Turn the cap counter clock wise on the Data Link Connector and insert the Reset Tool
3) Follow the instructions of your reset tool, different models may have different functions however they all create a short in PIN 7 to PIN 19 for a given amount of time.

  • OIL Service Reset requires pin 7 and 19 to be closed for 3+ seconds
  • INSPECTION Service Reset requires pin 7 and 19 to be closed for 10+ seconds


  • 4) Once done, remove the reset tool and close the cap .
    5) Your dash should light up with green lights at this point.
    If the light did NOT reset after the above steps then you might be resetting Oil Service however an Inspection Service is needed.

    Aug 04, 2010 | 1998 BMW 7 Series

    2 Answers

    After the oil was changed on my 2005 Dodge Van, the oil service light keeps coming on. If I turn the van off and restart it, the light goes out and stays out until I restart it again. I had the oil changed...


    First... Read your owners manual - page 226 - Turn the ingnition switch to ON (do not start) and fully depress the accelerator pedal slowly 3 times within 10 seconds and then turn the ignition switch to OFF position.
    Good luck and keep me posted.

    Feb 22, 2010 | 2005 Dodge Caravan

    2 Answers

    How do i reset my oil light? my husband changed


    TURN THE IGNITION KEY TO RUN WITH THE ENGINE OFF.FULLY PRESS AND RELEASE THE ACCELERATOR PEDAL THREE TIMES WITH IN FIVE SECONDS.YOU HAVE TO DO THIS MORE THAN ONE TIME.ITS NOT GOING TO RESET FIRST TRY BUT DO THIS PROCEDURE.UNTIL THE CHANGE ENGINE OIL LIGHT WILL FLASH WHILE THE SYSTEM IS RESETTING.TURN THE KEY TO OFF.WAIT A FEW SECONDS.START CAR UP TO SEE IF CHANGE OIL LIGHT COME BACK ON.IF YES YOU HAVE TO TRY THE RESET PROCEDURE AGAIN.

    Sep 26, 2009 | 2006 Chevrolet Equinox

    2 Answers

    I have ust serviced my 2001 volvo s40 and now the


    did the sevice light come on before you serviced it? when you "serviced" it I assume you changed the oil and now need the service light reset.
    I bought the 1998 S70. it got time to change the oil. Being how I am I changed the oil myself. I had to call dealership about resetting the service light.
    they said $29.96.
    I said 29.95?!!! how much if YOU would have changed my oil and reset the light?
    they said $29.95.
    so I learned you need to access the OBDII to reset the light.after service. hope this helps.

    Jun 13, 2009 | 2005 Volvo S40

    1 Answer

    "OILSERVICE" message in dash on after oil change


    YOU NEED A RESET TOOL IF YOU DONT WANT TO PAY TO HAVE IT DONE LOOK ON EBAY THE THE RESET TOOL

    Mar 29, 2009 | 1998 BMW 5 Series

    3 Answers

    SERVICE DUE SOON LIGHT


    Press odometer reset/adjustment shaft in, hold in and turn key to run position. Keep holding in the reset shaft in for about 30 seconds. release shaft. turn key off. restart car. Service Light should go off in about 5 seconds.

    Mar 25, 2009 | 2008 Acura Tl

    Not finding what you are looking for?
    1996 BMW 318 Logo

    Related Topics:

    625 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top BMW Experts

    Fred Sops

    Level 2 Expert

    271 Answers

    Al Clark

    Level 2 Expert

    290 Answers

    Doberman

    Level 2 Expert

    246 Answers

    Are you a BMW Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...