Question about Mercury Mystique

1 Answer

1995 mercury mystique starter replacement process?

How do I remove the starter on a 1995 mercury mystique?

Posted by on

  • Anonymous Jan 11, 2009

    i have a 1996 mystique with a 2.0 and the starter is acting up. i dont know where it is or how to replace it. can anyone help

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

At first, it looks like an impossible task, however if you start by removing the positive battery cable, then unplug mass air flow sensor, carefully remove air filter box and its components from the throttle body. from there you should be able to see the starter better and have more room to work and get it out. You can take the battery right out if you want a little more working space for your elbows. take the wires off the solenoid, sometimes the old studs of solenoid will break due to corrosion. remove the two 13mm bolts that hold the startersome models have one at the bottom also that you will need to access from the bottom side.

Posted on Nov 06, 2011

  • adam spatola Nov 06, 2011

    At first, it looks like an impossible task, however if you start by removing the positive battery cable, then unplug mass air flow sensor, carefully remove air filter box and its components from the throttle body. from there you should be able to see the starter better and have more room to work and get it out. You can take the battery right out if you want a little more working space for your elbows. take the wires off the solenoid, sometimes the old studs of solenoid will break due to corrosion. remove the two 13mm bolts that hold the startersome models have one at the bottom also that you will need to access from the bottom side.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace front wheel baeringue


It is a press in bearing . You will need about $600 in tools to get her done

Jan 14, 2014 | 1995 Mercury Mystique

1 Answer

Replace blower motor resistor 1995 Mercury Mystique


Probably connected to the blower switch. Actually it is a group of resistors in a block. BTW, there also is a thermal fuse in the resistor group that might be the cause of failure

Sep 23, 2012 | 1995 Mercury Mystique

1 Answer

How do you remove a starter on a 1998 mercury mystique 2.0 litre


Please first see my tip at http://www.fixya.com/cars/r5973094-starter_replace, then see specific instructions below for your Mercury. Let me know if you have questions.
Your starter is in the back of the engine.
from autozone.com
  1. Disconnect the negative battery cable.
  2. Remove air intake resonators. [loosen clamp and remove bolts, lift out resonator]
  3. Remove starter motor upper mounting bolts.
  4. Raise and support the vehicle.
  5. Remove the nuts on the starter terminals and remove the cables from the terminals.
  6. Remove the two starter lower retaining bolts and remove the starter.

e18db91.gif
resonator


eaf7550.gif
upper starter bolts



77b70cc.gif

Sep 26, 2010 | 1998 Mercury Mystique

1 Answer

Firing order for a 95 mercury mystique 2.0L


For 1995 Mercury Mystique 2.0 liter DOHC L4 VIN "3" check...

4e6e283.gif

Hope this help (remember comment and rated this post).

Apr 19, 2010 | 1995 Mercury Mystique

1 Answer

1995 mercury mystique heater died today. I smelt


YOU'LL FIND A MELTED 40 AMP FUSE IN THE FUSE BOX UNDER THE DASH ABOVE AND LEFT OF THE BRAKE PETAL. GOOD LUCK!

Nov 22, 2009 | 1995 Mercury Mystique

1 Answer

What would cause the eec module fuse to blow in a 1995 mercury mystique


mine had a short in the wire had to replace resister in wiring to coil pack

Nov 04, 2009 | 1995 Mercury Mystique

1 Answer

I have a 98 mercury mystique v6, When I try to start,


just a stab in the dark here. maybe starter drive bad, or starter sellinoid, or the worst case teeth gone on one section of flywheel. i would say its either starter drive or starter sellinoid. either case starter has to be removed. hope this helps. OLD SCHOOL.

Jan 10, 2009 | 1998 Mercury Mystique

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

984 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...