Question about Chrysler LHS

2 Answers

I have a 1997 Chrysler LHS with a 3.5 automatic trans. Last week it just stoped. It will crank over but will not start. So far I've replaced the fuel pump and filter and the coil pack and still nothing. I figured that fuel spark crank = running enging. any help would be great thanks

Posted by on

  • 60s70smoparn Jul 28, 2008

    I already replaced the coil pack.....there is no cap and rotor.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Other than the ignition system, you may also want to check your alarm, security and immobilzer as those by their very nature and purpose will cause no spark/no start. Try checking the various connectors of the alarm module. This would be in either the driver side or passenger side kick panel. You can try temporarily grounding the light green/orange wire which would disarm the alarm.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Jul 28, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

Check the cap and rotor and see if they're deteriorated. Inside the distributor cap you'll see six contact points around the inner edge. The rotor spins on a center axis and contacts each point on its way around - this triggers the wire that corresponds with the point to fire its plug. If the points are corroded or dirty, you can clean them with a toothbrush and electrical contact cleaner. Inspect the rotor as well - the edge of it should be ridged like the edge of a quarter. If it's smooth, it's probably worn too much to fire properly.

Posted on Jul 28, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 97 lhs that wont start we have replaced


a double post? see my long answer, on 1st post.

Oct 02, 2013 | 1997 Chrysler LHS

1 Answer

1997 chrysler lhs turns over but no spark. already changed Cam pos. Sensor and Coil block


Try the crank sensor this is the sensor most likely to cause this not the cam sensor. To get to the crank sensor you will have to jack up the passager side of the car and the sensor is located on the transmission bell housing about 3/4 of the way up on the trans were it connects to the engine.(all on the passager side of the trans) It has a 3 wire plug and one 10mm bolt that holds it in. Hope this helps

Mar 06, 2010 | 1996 Chrysler Concorde

1 Answer

I have 97 chrysler lhs 3.5l that just died on me and wont start its getting fuel ive replaced the ignition coil and the cam and crank sensors but still wont start and am getting an cam sensor not giving...


I would check the timing belt probably broke. Best way pull the cam sensor out take a flashlight shine it down in the hole and have someone turn it over. u should see it turning if you don't the timing belt is broke. good luck

Oct 10, 2009 | 1997 Chrysler LHS

1 Answer

1994 Chrysler LHS Starting Problems


it's either a spark or fuel fault , if there is spark after it shuts down it is a fuel fault. connect a pressure gauge in the fuel line, start the engine , note fuel pressure around 35 psi , stop engine , pressure should drop a little then hold, if not check pump return valve and pressure regulator , check fuel flow , if low replace fuel filter,

May 05, 2017 | 1994 Chrysler LHS

1 Answer

Motor


Determine if the engine is getting fuel, then check for spark, and last but not least make sure you have compression. Which engine do you have? It's hard to help you diagnose and help you get back on the road with out this important piece of information.

Jun 23, 2008 | 1997 Chrysler LHS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...