Question about Toyota Pickup

1 Answer

I have a 4 speed 86 pickup i could start my truck by pushing in the clutch but when its on i cant get it into gear any suggestions thanks and mahalo

Posted by on

  • chaise_colun Jul 29, 2008

    ok well i know it has something to do with the clutch this is what happens. I could start my truck by pushing in the clutch however when my truck is started i cant put it into gear by pushing the clutch. when i do push the clutch it doesnt give any tension either its really loose. thats about all there is to it thanks for your help and mahalo.

  • yadayada
    yadayada May 11, 2010

    Could you please be a little more clear about the problem, I am not sure what you mean, tell me exactly what happens, even if it take twenty lines of typing, and I will try to help.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Toyota Master
  • 77,932 Answers

Ok here is what is going on, if your clutch is hydraulic then you need to replace the Master and slave cylinder, the worst case is the clutch pressure plate is at fault, but I don't see that very often. You will need help to bleed the air out of the new parts, so grab a buddy.

Posted on Jul 29, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 1993 Suzuki swift 5 speed. My son hit a dip in road hard it killed motor. Unable to pop the clutch

motor still dead, (my other shoe drops)
pop clutch, what does that mean.?

clutch is bad? what?
if you cant crank engine in gear, the clutch is bad.
hint, it can be the clutch actuators not the deep inside parts.

or does cant pop, mean
Car will crank but not start. so I pushed the car and popped the clutch in 2nd gear and it will not start either.

please post with all symptoms, pretend net bunny here are blind.
smart bunny's but totally freakn blind.

Jun 26, 2015 | Suzuki Cars & Trucks

1 Answer

Hyundai Accent 2001 petrol

check the clutchrelease bearing holder

Feb 07, 2014 | Hyundai Accent Cars & Trucks

2 Answers

86 nustang svo, clutch is "engaed" even when you

Dearest gentlepersons please help on car panel it said stop engine car over heatting

Aug 26, 2013 | Cars & Trucks

2 Answers

Clutch go's all the way to floor with no resistents can not shift gears engine won't stay on. 1987 5 speed pickup truck

Sounds like the hydraulic fluid may have leaked out of a line or the slave cylinder is leaking, or the master clutch cylinder has an internal leak that doesn't actuate the clutch effectively when the pedal is pushed to the floor.

Oct 28, 2010 | 1987 Nissan Pickup

1 Answer

93 toyota pickup. 4 cylinder, 5 speed manual 98k. ...

possible selector linkage adjustment , loose or shifted

Jul 02, 2017 | Cars & Trucks

1 Answer

I have a 94' Toyota pick up truck. 2wd, 5spd and my transmission or something is grinding pretty often, I might shift too quick. But it sounds like a roaring while driving, and sometimes it sounds like...

Sounds to me like your transmission is just plain worn out from running with no fluid in it. I have an early 5 speed from the 1988 Toyota that works fine if your interested. I have the same from an "84 in my "86 Toyota pickup I just took off the road last January. The '94/'95 should be the same if you want to keep your truck on the road. Mine had frame rot, typical of these trucks.

Aug 24, 2017 | 1994 Toyota Pickup

1 Answer

86 isuzu clutch- master cylinder ran dry

Did you bleed the system? There is probably a bleeder on the slave cylinder and you may need to jemmy the selector fork/ Also look fro a damper valve between the master and slave cylinder... it will need bleeding too.

Nov 07, 2008 | 1986 Isuzu Pickup

1 Answer

Ford transmission 86 4wd will not shift to high gear

It is hard to say from your description what the problem is ... could be linkage issue ... could be trans is going as is with the other poster ...
Losing overdrive. Clutches (bands/clutches) have had it. Be careful driving without that top gear ... doing too high a speed without the appropriate gear causes extra stress on your engine that could accelerate further problems. Try to do only driving at a low enough speed that the top gear is not missed ... will help the vehical last as long as possible.

Oct 13, 2008 | 1986 Ford Bronco

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8832 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides