Question about Ford Taurus

2 Answers

Cylinder 1 misfire code p0301 - Taurus Ford Cars & Trucks

Posted by on

  • Anonymous Aug 25, 2008

    two codes both say misfire cylinder 2 p0302 and the other says the same thing but has the code of p0302pd

  • ronald Jun 09, 2013

    how to fix p0301 on chevy cobolt

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Kenracer yes our codes p0301 and p0306 is the #1 and #6 misfire

Posted on May 21, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

98 dodge ram 1500 5.9l p0301 p0306 is this the 1 and 6 cylinder misfire?

Posted on Mar 21, 2009

6 Suggested Answers

Bat1956
  • 585 Answers

SOURCE: cylinder 1 misfire

If it smooths out at wide open throttle it's probably not the injector but rather a substantial vacuum leak at that cylinder.

Posted on May 06, 2009

  • 4977 Answers

SOURCE: misfire on cylinder no.1 fault code P0301

there are a few things that set this code.a bad spark plug,a bad spark plug wire,a bad ignition coil,a bad fuel injector(either not working or very dirty),a compression problem(either poor valve sealing or piston assembly problem),a vacum leak at cylinder #1,the rule of thumb is you need 3 things for a cylinder fire,spark-fuel-air.

Posted on Mar 09, 2011

Testimonial: "excellent thanks, have changed the plugs and didnt want to go for a coil pack untill i had a second opinion"

jmeyer847
  • 185 Answers

SOURCE: code scan: P0301 Cylinder 1 misfire detected

Code P0301 is a generic OBD Code for Misfire. It also indicates you have a misfire in the #1 Cylinder. I would start by checking the plug wire to make sure its clean and on all the way (at the coil as well). Then if that doesnt help I would pull the plug out and check the condition of the spark plug. hopefully this will give you some direction. Thanks for Using FixYa!

Sincerely,

JC

Posted on Dec 03, 2008

  • 6 Answers

SOURCE: Toyota Corolla 1999 code p0301

faulty injector maybe?

Posted on Dec 13, 2008

  • 73 Answers

SOURCE: P0460 Fuel Level Sensor Circuit Malfunction

most of the time the coil goes bad, but the po460 code if it is a flex fuel car the module behind the radio goes bad

Posted on Jul 01, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Chevrolet equinox misfire code p0301


p0301 is a misfire in cylinder # 1 replace that coil pack ,regaping plugs won't cure it

Aug 06, 2014 | 2005 Chevrolet Equinox

1 Answer

I would like to know what these codes mean


P0171 System Too Lean (Bank 1)
P0174 System Too Lean (Bank 2)
P0301 Cylinder #1 Misfire Detected
P0302 Cylinder #2 Misfire Detected
P0304 Cylinder #4 Misfire Detected
P0306 Cylinder #6 Misfire Detected

Mar 12, 2014 | 1999 Ford Explorer

3 Answers

CODES-PO301-PO303-PO316- CHANGED PLUGS & WIRES. STILL MISS ON START UP, GOES AWAY MOST OF THE TIME ABOVE 1000 R.P.M


P0301 - Cylinder 1 Misfire Detected.

Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak

Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

P0303 - Cylinder 3 Misfire Detected.
Follow info from P0301.

P0316 - Misfire Occurred In The First 1,000 Engine Revolutions.

Causes:
- Damaged CKP sensor.
- Ignition System.
- Fuel Injectors
- Running out of fuel
- Fuel Quality
- Base engine
- Damaged Powertrain Control Module

Solutions:
Usually the P0316 is combine with a P03XX codes. The P03XX code indicates in which cylinder the misfire occurred.

Jan 17, 2011 | 2002 Mercury Sable

1 Answer

Oo dodge durango is flashing codes p0201,p0207,p0300,p0301,p0307 what is this telling me that needs to be fixed


P0201?? Injector #1 Ctrl Circ /
P0207 Injector #7 Ctrl Circ /

P0300?? Multiple Cylinder Misfire
P0301?? Cylinder #1 Misfire
P0307?? Cylinder #7 Misfire
are the codes start with the basics inspect plugs wires cap rotor and if all checks out do a compression test

Dec 31, 2010 | 2000 Dodge Durango

1 Answer

WHAT IS THE CAUSE OF THE PO301 CODE?


The error code p0301 ,This code is related to misfire.The cylinder is misfiring. p0301 this is the indication of cylinder number 1 ,that is misfiring.If the code comes up as p0300 this is the indication of random misfire from all the cylinders.But in your case its indicating p0301 this is indication of cylinder 1 misfire.Check cylinder 1 and replace the faulty cylinder 1 to clear the fault.The spark plugs and the wires connecting to spark plugs also needs to be checked. Keep updated with any more query.Thanks.

Oct 12, 2010 | 2003 Mitsubishi Lancer

2 Answers

2000 honda crv p1399 and p0301 check engine codes


Code P1399 is specific to Honda - it is an error code for "multiple variable misfires detected". P0301-P0304 are common OBDC codes for all cars, specifically "misfire in cylinder X".

You will get the P0301-P0304 codes on your OBDC reader when you plug it in (if actually errors), but will only find the P1399 if you select Honda as the manufacturer.

Just got these errors today on my CRV 2000. Now I have to figure out what is causing two of the cylinders to misfire.

Mar 08, 2010 | 2000 Honda CR-V

2 Answers

Obd codes p0300 p0301 p0303 p0305 p0401


P0401 Exhaust Gas Recirculation Insufficient Flow Detected

P0300 Random/Multiple Cylinder Misfire Detected
P0301 Cylinder 1 Misfire Detected
P0303 Cylinder 3 Misfire Detected
P0305 Cylinder 5 Misfire Detected


I would check out the EGR valve. That maybe what is causing all the misfires.

Mar 24, 2009 | 1997 Toyota Camry

1 Answer

I am workiing on a 1999 toyota carolla has a misfire


Here is a good site for OBD II trouble codes.  P0300: Random/Multiple Cylinder Misfires Detected, P0301: Cylinder 1 Misfire Detected, P0304: Cylinder 4 Misfire Detected.

Jan 25, 2009 | 1999 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

8,139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...