IS THERE A SPECIAL TOOL FOR REMOVING A AC COMPRESSOR FROM A LINCOLN TOWN CAR 1997?

1/4" socket drive with no socket on it. Videos and text articles.

https://www.cargurus.ca/Cars/Discussion-t16157_ds758585

Videos
https://www.google.com/search?q=remove+the+engine+cover%2C+2007+Lincoln+Town+Car

..

no for the injectors you need a special tool to remove the fuel lines

it is behind your air compressor just remove a/c compressor and un bolt 1 bolt to senor and un plug it

Both the control panel contols the voltage incas of a serg and the ac rely also controls the voltage to that thw ac will work.

if the ac is not working then if you leave it switched off there will be no need to get a special belt to by-pass it. The pulley on the ac compressor is just an idler pulley that only turns the compressor when there is current to the clutch in the pulley. IF you never use the ac the pulley just spins . The problem with special belts is if they fail (and they do ) it will be where/ when you cannot get a special belt but you will always get a proper belt from any spares store or garage.

Takes special tools you won't have & refrigerent
experience to get system working again,more tools
& equip

Need a shop that does a/c

You must remove the engine cooling fan (requires special tool) and the fan shroud, I have done about 100 of these and once those parts are removed it is easy to get at.

You can replace just the clutch. You will need a special puller to remove the clutch, it screws to the front of the compressor and presses it off. I believe the same tool is used to install it, also. Not completely sure on that point. The tool may be able to be rented from an auto parts store, or may be available on eBay for a reasonable price.

The only thing that would prevent you from doing so, would be the ammount of room in front of compressor that you will need for the tools. Other than that shure.