Question about 2000 Dodge Caravan

1 Answer

Electrical front windows do not open back windows do no open the a/c fan works only on hogh speed front and back wiper motors have already bee replaced Is there some main electrical station that could be causing all these problems

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

No. I have a Caravan 2000. I can tell you that I have had to change the fan motor relay twice and it has worked ever since. As for the windows, let me guess... It goes down a little at a time, and then back up a little at a time as if it needs to cool off after 1inch or work? If so, your motor is busted. Not related to the fan!

Rear window wiper same thing! Nothing is related, they are only common problems on Caravans that somewhat happen after any given amount of time.

Posted on Aug 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front windshield wipers will not work


The front wipers are controlled by the TIPM - totally integrated power module (electronic module ) ! Check power an ground at the wiper motor connector . Four wires , Black is ground , brown / white is low speed , brown/lite blue is high speed ,brown / orange is park switch sense . Can you do this ? Go to http://bbbind.com/free_tsb.html free wiring diagrams ! Videos on you tube on basic automotive electrical testing , how to read a wiring diagram , how to use a DVOM etc... That is if you don't already know how to . Defective TIPM Is Causing Dangerous Power Problems in Chrysler Vehicles Then again after you read this you may want to take it to the dealer !

Sep 28, 2016 | 2007 Dodge Caliber 2.0

1 Answer

Why aren't electric windows, sunroof and windshield wiper delay and slow speed working?


[PDF]mini body control module - BMW-Planet.com

www.bmw-planet.com/lib/mini/BODY%20CONTROL.pdf
Always check ALL the fuse that supply power to the BC1. ... the heated rear windowand optional heated front screen until the voltage level exceeds 12.2 ... Convenience Opening and Closing of windows and sunroof ..... intermittent wipe, slow, and fastspeeds. .... Road speed has no influence over wiper speed 1 (Slow).

Nov 19, 2015 | Cars & Trucks

1 Answer

My window screen wipers on my audi a4 have stopped working but motor is still working


If you are talking about front window screen wipers.
Than the problem is in motor that is broken and can't wipe your screen any more. You need to replace it. And you hear a water pump that's give water to screen.
But if it is back window wiper. Then the motor is dead too. Had the same problem. Trying to fix but no success.
Overall solution: replace the electric motor.

Sep 29, 2013 | 2005 Audi A4

1 Answer

Want to change fan on blower heater


Removal

  1. Remove wiper arms.
  2. Remove cowl panel.
  3. Disconnect blower motor electrical connector and vent tube.
  4. Remove blower motor retaining screws.


  1. Remove fan retaining nut from blower shaft through plenum opening while holding the fan from the engine compartment.
  2. Remove fan from blower motor while removing blower motor from vehicle.
Installation

  1. Hold fan through plenum opening.
  2. Install blower motor to vehicle while installing fan to blower motor.
  3. Install fan retaining nut to blower motor shaft through plenum opening.
  4. Install blower motor retaining screws.
  5. Connect electrical connector and vent tube.
  6. Install cowl panel.
  7. Install wiper arms.

Aug 13, 2013 | 1991 Oldsmobile Cutlass Ciera

1 Answer

I have a 1997 Mitsubishi Montero Sport and my front wipers do not work. I have a ground, and i even tried getting a brand new wiper motor and my wipers still do not work. What can i do?


your wiper motor doesnt have a problem, check the electrical connection and wiring and try to remove the ground. check the fuse, maybe one of the fuse is already busted

Mar 26, 2011 | 1997 Mitsubishi Montero Sport

1 Answer

My rear power window is stuck open.. The button on the headliner still opens and closes the right side window but the left on will not shut. Also the rear wiper motor quit working..


if you have already checked your fuses and since the button on the door will not open or close the window and the driver's switch will not open or close the window either then chances are that the window regulator motor is bad. take the door panel off and unhook the wire to the motor using a voltage meter push the button and see if you get 12 volts if you do replace the window regulator motor. you may have to switch out the whole window regulator. do the same with the rear wiper motor take the back panel off and remove the wire from the motor connect your voltage meter to the motor and turn on the rear wiper it may be intermitting so wait a minit and see if you have voltage if so replace the motor. if not replace the switch.

Dec 08, 2010 | 2005 Saturn Relay

3 Answers

How easy is it to replace the front wiper motor on a 2004 ford escape ? Where is it located ?



Front Wiper Motor
Removal & Installation

NOTE A new wiper motor assembly comes with the linkage arm installed.
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove the windshield wiper mounting arm and pivot shaft
    WARNING Do not remove the wiper motor linkage arm from the wiper motor assembly. If the arm is removed, the wiper arms may not park in the correct location.
    NOTE Use a suitable tool to separate the wiper linkage arm from the wiper mounting arm and pivot shaft assembly.
  3. Remove the 3 bolts and the wiper motor.

    7f7866e.gif

    Fig. Wiper motor and linkage

To install:
  1. Install wiper motor and bolts.
  2. Tighten wiper motor bolts to 10 ft. lbs. (13 Nm).
  3. Install windshield wiper mounting arm and pivot shaft.
  4. Check wiper operation.

Rear Wiper Motor
- Removal & Installation
  1. Remove the rear pivot arm.
  2. Remove the rear wiper motor shaft nut cover
  3. Remove the rear wiper motor shaft nut.
  4. Open the lift gate window.
  5. Remove the rear wiper motor cover trim panel.
  6. Disconnect the electrical connector.
  7. Remove the 2 rear window wiper motor nuts
  8. Remove the rear window wiper motor.

    79be491.jpg
    Fig. Rear wiper motor view-2008 model shown, other years similar

To install:
  1. Install rear wiper motor and tighten mounting nuts to 62 inch lbs. (7 Nm).
  2. Reconnect the electrical connector.
  3. Install wiper motor cover trim panel.
  4. Install rear wiper pivot arm tighten nut to 53 inch lbs. (6 Nm).
  5. Install shaft nut cover.
  6. Check wiper operation.

Good luck (remember rated this post).

Feb 25, 2010 | 2004 Ford Escape

1 Answer

I have a 1999 Saab 9-5. The fan blower doesn't


The fan is located under the windsheild wipers. The windsheild wipers will have to be removed. Then remove the plastic shroud and wiper motor and assembly. The fan is located in the middle under the windsheild. If your feeling the AC you can check the stepping units located on the AC unit behind the front console under the dash.....KEH

Aug 04, 2009 | 1999 Saab 9-5

1 Answer

Toyota 4runner gate window, wiper, and keyless entry not working


make sure the back window is all the way up then try the wiper, if it still does not work then it is a sensor for the rear window (about $30.00) if you installed it yourself

Mar 31, 2009 | 2000 Toyota 4Runner

1 Answer

Hyundai Accent 1998 Front Wiper and Washer Won't Turn Off


the black switches are master switches. They control stuff like the horn, the lights, wipers, AC, Engine Fans, and....there's one more that it controls, but i dont remember what it is. But you're going the wrong way about this. You're on the wrong side of the engine. You want to be on the opposite side of the engine, along the firewall, close to the front shocks by the windshield wiper motor. That's more than likely your problem. A little bit of water, grease, or some dirt might have slipped past the seal and caused a malfunction in the control wheel. Just open it up, clean it out, add some grease to the appropriate area, blow dry the circut board, stitch it back up, and that should solve the problem.
Please keep in mind that my American Car is a sligh bit different than your Australian Car. If the directions don't match up, i'm sorry for the inconvenience.

~Hope this helps

Mar 16, 2009 | 2003 Hyundai Accent

Not finding what you are looking for?
2000 Dodge Caravan Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...