Question about 2005 Ford Focus

1 Answer

Thank you! You were right on the money Sweetie. And I will pass on something I learned that might help you. The bulb was a right rear. I pulled a 4057. I looked at the local parts stores and could not find one. Was a special order. But I used the little grey matter I had and had the guy look up what the bulb they use now was and came up with a 3357/3457. I used that has a shot in the dark and it worked fine. Hope that helps you in the future! Thanks again!

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Ford Master
  • 77,499 Answers

The 4057 is a heavy duty filiment, they last longer.

Posted on Sep 02, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Right rear turn signal doesnt flash front right flashes fast, says right rear light out on dash all bulbs are new 2002 dodge ram 1500

Something wrong with the right rear bulb. with the front right blinking fast that is your indicator that the rear bulb is out. My first though change the rear bulb. Could be faulty or even the wrong one was placed in it. parts paces are terrible for giving out the wrong bulbs.

Oct 21, 2017 | Dodge Cars & Trucks

1 Answer


There must be a "Fairlure (light) Sensor" in or around the rear lights. This tiny circuit can be on the left side of the tail-light or on the right side of the tail-light. Pull out both sides, and only one side has a tiny box with the circuit in it. This circuit is a safety thing to let you change the bulb, but when this circuit is bad, you will have to replace that particular tail-light, unless you want to by-pass the circuit.

Oct 04, 2017 | Cars & Trucks

1 Answer

Hi , I have a 97 dodge neon and when a turn my right blinker on , all the rear lights blink too, the rear left,right and the 3rd break light also , help please!

pull the bulb out of the right front and see if the brake lights stop going on -something is causing a feed back that is triggering the brake lights to come on with the turn signal-these are separate systems so something crossed so its shorting between the two-cheers Denny

Dec 04, 2013 | Cars & Trucks

1 Answer

How do I replace the brake light in the rear window? How do I get to the bulb?

  • Hi, I can help.

  • To change the third brake on a 1989 Reliant you basically pull out ******* the cover and it pops off the rear window.
  • Now you give the bulb socket a quarter turn to the left.
  • Now pull the old bulb strait out.
  • Now replace the bulb socket.
  • Now firmly replace the cover.

  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa

Regards, Tony

Sep 19, 2011 | 1989 Plymouth Reliant

1 Answer

We need a light bulb and a light bulb lens cover for the rear license plate of our 2003 Kia Spectra to pass inspection. We can purchase the complete assembly for $60.00 which we cannot afford. Any help...

I spent a great deal of time trying to remove and replace a lens and bulbs on my 2003 Kia Spectra only to learn that the bulbs were good and the lights were working, but the Highway Patrolman that pulled me over didn't realize they were just dim because they needed to have the lenses cleaned. Any aftermarket bulb holder and new bulb should work here so you don't have to go with the original equipment.... you just need to get to the wires for the old assembly and splice them carefully to your new bulb holder from a parts store. They can give you free advice at the parts store. Don't be afraid to ask.

Jan 17, 2011 | 2003 Kia Spectra

3 Answers


there are two rods one on each side, silver in color or black, just twist and lift them right out. the light will then just come right out

Jul 31, 2010 | Chevrolet Avalanche Cars & Trucks

2 Answers

Turn signals blink fast (lights still work)? what

Hello. This happens when one of the bulbs is starting to go bad. pull all of the turn signal bulbs and look carefully at each one. you will find one with the filaments crossed. Replace that one. J.

Jun 15, 2010 | 1998 Honda Accord

2 Answers

How to replace a fuse on 2002 Mazda Protege 5?

It's not a fuse, your park lamps/tail lamps front and rear all get voltage from the same source. In the diagram, top wire is voltage bottom wire is ground. May be a problem with wiring circuit, either voltage or ground. Did you try pushing on the bulb to see if it would lite up, if it does, something wrong with bulb socket.
tail lamp-xnondzrd4urq5tvk2w2vslnm-1-0.jpg

Jul 02, 2017 | 2002 Mazda Protege

2 Answers

Replace the rear right turn signal bulb

There should be two more screws inside the car behind the carpet lining

Sep 17, 2009 | 2004 Chevrolet Malibu

1 Answer

1998 Buick Park Avenue


Jul 30, 2008 | 1998 Buick Park Avenue

Not finding what you are looking for?
2005 Ford Focus Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5610 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides