Question about 2001 Ford Mustang

1 Answer

Engine codes what do 2001 ford mustang engine codes 1504 and 1507 mean?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

P1504 Idle air control circuit malfunction
P1507 Idle air control underspeed error

Posted on Nov 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How turn off check engine light


Pickup a cheap code reader from your loc Parts store. Plan on spending around $50. Plug it in to the aldl and clear the code.

Aug 07, 2012 | 2001 Ford Mustang

1 Answer

2001 Ford Mustang engine miss


most likely cause is a coil pack playing up ,ask a local mechanic to read the codes and see what they come up with then post a reply

Nov 20, 2011 | 2001 Ford Mustang

1 Answer

Replace serpentine belt 2001 Ford mustang


Model MUSTANG
Engine V6 3.8L 232ci GAS FI N 4

zjlimited_2048.jpg

Oct 15, 2011 | 2001 Ford Mustang

1 Answer

Where is the IMRC (INTAKE MANIFUL RUNNER CONTROL) on a 2001 Ford Mustang.. Got code P1518.. Had a fuel injection cleaner done, but service engine light is still on.. So Want to check it out. Thanks


Hello, First the Service light has to be cleared from the computer by a scanner or by disconnecting the NEG battery cable for 10 minutes. The scanner is a better idea because some radios and antithefts can act up when the NEG connection is open.

If you still have a problem and have the 3.8L V-6 engine for the 2001 year model this engine did not use a manifold runner in a conventional way. The code means on your model, that a plastic part on a runner actuator probably broke and the rod underneath is loose. There is also a repair program for your DPFE which carries a Ford Repair Program number 02m01 and its free. Ask for an OASIS test at a Dealer.

The V-8 models and in later years used a dual channel intake for each cylinder. One part is a constant velocity port and the other channel opens up above 3000RPM. If you have a V-8, get new gaskets, choke cleaner and remove the Intake to clean the runner plates. The plates can stick if they are dirty.

I hope you find my solution very helpful.

Apr 03, 2011 | 2001 Ford Mustang

1 Answer

Where is the engine number located on a ford mustang engine 6cyl 2001?


For 2001 Ford Mustang 3.8L SFI 6cyl engine, with which your specific vehicle is equipped, can be most easily identified by the Vehicle Identification Number (VIN), located on either the VIN tag, mounted in the upper left-hand corner of the instrument panel, or on the vehicle certification label, located on the driver-s side door pillar. The engine identifying code is the 8th digit of the VIN. The engine VIN codes are as follows:

zjlimited_352.jpg

FIG: Engine identification codes may also be found on a label affixed to the left side rocker arm cover

4-3.8L SFI (OHV) engine N-4.0L SFI (SOHC) engine H-4.6L SFI (SOHC) engine V-4.6L SFI (DOHC) engine
X-4.6L SFI (SOHC) engine

Hope helps.

Dec 29, 2010 | 1982 Ford Mustang

1 Answer

Code p1120 on a 2001 mustang base model


A P1120 means a throttle position (TP) sensor out of range. It could be TP circuit with frayed wires, corrosion on TP circuit connectors, or TP sensor loose pins. If you are not knowledgable in this area, I highly recommend that a knowledgable mechanic deal with this issue and may recommend a replacement.

Oct 07, 2010 | 2001 Ford Mustang

1 Answer

Turn off check engine light on 2001 mustang off for free


you can disconnect the negative battery cable and reconnect to clear the codes but to get it inspected in most states it has to clear the 'ready's' by driving it. here in nc it can only have one not ready for an 01. if you drive it to get it to clear though, it will most likely turn the light back on so you may have to see what its on for and fix it

Oct 03, 2009 | 2001 Ford Mustang

1 Answer

2001 ford mustang service engine light on


IT ALMOST SOUNDS LIKE YOU MAY HAVE A VACUUM LEAK SOMEWHERE. USE A LENGTH OF RUBBER HOSE AND HOLD IT UP TO YOUR EAR TO PIN-POINT THE LOCATION OF A VACUUM LEAK. HOPE THIS HELPS. LET ME KNOW PLEASE. THANK YOU IN ADVANCE FOR AN HONEST RATING AND THANKS FOR USING FIX-YA. P.S. EGR VALVE IS VACUUM ACTUATED

May 07, 2009 | 2001 Ford Mustang

1 Answer

2006 Ford mustang check engine light come on


You need to have it scanned to see what code turned on the light. Check your gas cap, make sure it is tight.

Feb 27, 2009 | 2006 Ford Mustang

1 Answer

Engine service light


The DPFE (Diferential Pressure Sensor)sensor is usually mounted on the engine and is connected to the pipe that runs from the exhaust manifold to the EGR valve with two rubber hoses. When the sensor goes bad, the Check Engine light comes on and typically sets any or all of teh following fault codes: P0171 & P0174 (lean codes), and/or P0401 (insufficient EGR flow). Nine out of ten times, the fault is not a bad EGR valve or a vacuum leak, but a bad DPFE sensor. A replacement costs about $112 at Ford, or about $48 at an aftermarket auto parts store.I hope this helps.

Sep 30, 2008 | 2001 Ford Mustang

Not finding what you are looking for?
2001 Ford Mustang Logo

Related Topics:

582 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...