Question about Isuzu Rodeo

1 Answer

98 isuzu rodeo v6. Stranded... key lock cyclinder just spins... have accessory power not power to door locks, fans etc. It is sunday and no mechanics to help. Steering wheel is unlocked. How can I get it started so I can move to a safe location?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

2001 rodeo check trans & no single from fuel pump i can power the fuel pump and get the car to run in limp i think ive **** the cpu because ther is no power to the fuel pump single to the relay ....... am i on the right track???????

Posted on Oct 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot unlock my 2005 rodeo with key it will not turn in doorlock


sounds like someone playing a bad joke on you! lock is filled with goooooooo

Jun 17, 2014 | 2004 Isuzu Rodeo

1 Answer

Key won't come out of ignition (1198 Isuzu Rodeo). I checked the cable going to the ignition and it seems to be fine. Is there something else I can do/check?


I think the key and/or the lock mechanism is worn and the tumblers no longer line up to allow the key to come out. I think you only option is to replace the lock or have a locksmith do it. The possible reason for this is that the key and lock has been worn by an excessively heavy bunch of keys.

Mar 21, 2011 | 1998 Isuzu Rodeo

1 Answer

Need wiring diagram for 1992 Izuzu Rodeo 6 cyclinder.


For the 1992 Isuzu Rodeo 3.1L V6:
Firing Order
:

1-2-3-4-5-6
Cylinders:
.....(back)
5...............6
3...............4
1...............2
Distributor:
.....(back)
..............(+)-screw
.........4
..3
...................5
2
.................6
........1
(+)-screw
.....(front)
Rotation: Clockwise

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Aug 18, 2010 | 1992 Isuzu Rodeo

1 Answer

I have an Isuzu Rodeo and the key is stuck in the ignition any idea how to get it out? Year 2000


replace the whole ignition barrel with new key and get key programmed by dealer
can remove barrel and key by removing steering column covers turn ignition to on position and with small shank screw driver push in hole in outer top rear section of barrel assembly then pull out ignition lock barrel with key in it. fit new lock barrel and key, program new key into system and can get door lock barrels coded to suit new key or get code for old key and cut new key so it fits mechanical locks on the rest of the vehicle (just wont turn in ignition) 2 keys for vehicle.

Jun 13, 2010 | 2000 Isuzu Rodeo

1 Answer

How to program remote for 98 Isuzu Rodeo


1998 TF rodeo had electric door locks on some vehicles but there was no keyless entry remote on these vehicles. if you have a separate remote from the ignition key it could be an after market remote system.
if your trying to program the ignition key to start the vehicle this must be done by dealer with tech2
this is the case for Australian vehicles
later vehicles had a heart(rounded) shape keyless enty remote with 2 buttons and had red and green led for each button, which needs programming into system with tech2 by dealer
Jackaroo (Trooper) and Frontera had long rectangle 2 button remote which can be programmed into system by sequence of cycling ignition key opening and closing drivers door which newer rodeos went back to
each vehicles sequence is slightly different depending on year and vehicle.

Oct 29, 2009 | 2004 Isuzu Rodeo

1 Answer

Water pump replacement 96 isuzu rodeo


Remove belt, fan, fan shroud and fan bracket. Remove timing covers, timing belt and water pump. Replace timing belt and the hydraulic tensioner with new ones. I suggest you get a mechanic to do this as you can easly get it out of time. Not an easy job.

Jul 03, 2009 | 1996 Isuzu Rodeo

2 Answers

I lost my keys for my 2003 rodeo


you will have to get a dealer to cut new keys to code that dealers have access to and then get them to program to car but also erase old keys so vehicle wont start with old keys
or next more expensive option is new keys, ignition barrel and door barrels replaced which are differently same coded key and locks as well as programming and erasing old keys.

Jun 27, 2009 | 2003 Isuzu Rodeo

1 Answer

2004 holden rodeo, remote control key wont lock/unlock doors


try putting key in ignition turn to on position
then press lock & unlock several times slowly if door locks cycle up & down after 1st press it lost code and is now resynconised.
now try remote with all doors closed and key out of ignition
if this dont work need to register key(program)back into system which dealer must do with Tech2 if round heart shapped remote

Apr 09, 2009 | 2004 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

281 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...