Question about 1995 Toyota Pickup

1 Answer

How do you get the dash off to change the radio

Need help getting the dash off so that i can change the radio

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You have to unsrew...right of the gear shift on the lowerside unsrew the screws then all the way oer to the passenger door and there should be screws on the side top and bottom. knobs off radio

Posted on Aug 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know how to take the dash board apart with out breaking it to change the radio and then also will i lose my keyless entry thanks Harold


i'm not real sure about radios, but some of the newer radios have a tool you use to just take the radio out. does it have 2 little hole on each side of the radio? if it does you have to get a special tool to stick in the holes then it comes out, hope it helps, i'm just a hands on guy

Nov 27, 2010 | 2008 Honda Civic

1 Answer

Radio problems


if it's the original radio, the part in the dash is not the radio, it is just the control head. the guts of the radio unit are under the dash above the accelerator pedal. did you replace all of it? or just the control head or just the actual radio under the dash?

Mar 22, 2009 | 1994 Chevrolet K1500

1 Answer

No dash lights


possibly. i would get the wiring checked out by an electrician.

hope this helps.

Mar 18, 2009 | 2000 Volkswagen Passat 4Motion

2 Answers

''No Con'' appears on radio screen on 2004 Kia Amanti


the radio could be locked up you can pull the audio fuse in the dash out for a min or 2 then plug back in. that should fix it. if not you need a new radio. Kia doesn't make them anymore so you either need to find a junkyard one or go to the dealer to have them ship it out and get repaired.

Mar 16, 2009 | 2004 Kia Amanti

1 Answer

Dash light replacement


you have to take the radio apart to get to remove the face then you will need a solder gun to get the old bulbs out and put in the new ones

Mar 08, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Need dash wiring diagram for a 1993 Dodge Colt


i had this problem , all you need to do is hook the ground wire from your new radio to the braided wire that hooked on your old radio and insert a bolt in the hole and tightin ,then check fuses and your dash lights will work and dome light.

Oct 05, 2008 | 1993 Dodge Colt

1 Answer

Radio doesn't work


If you do not have a code, you need to take your car into a saab dealer who will quickly take the radio out to get it's radio code. They will then phone saab and get the four digit code for you. This is always the same so you need to keep the code safe for the future. They only charge about £15.
When you have the code enter the number in when your radio screen says code in with four dashes. If the screen only has four dashes and not the words code in then you need to leave the radio on for an hour until the screen comes up with the words code in. If you enter the code in incorrectly three times you will have to leave the radio on for an hour again. You cannot hear the radio while you wait the hour. Hope this helps.

Sep 15, 2008 | 1998 Saab 900

Not finding what you are looking for?
1995 Toyota Pickup Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...