Question about 1989 Ford Mustang

2 Answers

I am a law enforcemnet officer and I am installing a RADAR unit in a 2008 unit. I need to know the location of the VSS wire. On the 2006, the wire was a gray/black wire located behind the passenger's side kick panel.

Posted by on

  • jeepincity Nov 01, 2008

    Speedo quit working. I've change the ABS pick up in the Diff., the ABS computer, the dash cluster and bought the VSS but my car doesn't have a VSS anywhere??? Its a 1998 and says that its electronic but I have idea where the signal comes from with the lack of the VSS???????
    HELP!!!!!!!!!!!!!!!!!!!!!!!!


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The wire color is gray/black located at the passenger kick panel or at the PCM 50 pin plug, pin one. The PCM (Powertrain Control Module) is under the hood, on the driver side fender. On vehicles with premium audio, it is also found at the radio, 24 pin plug, pin 14.

Posted on Jul 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 58 Answers

Hi Hodgson, If you want,you can go on alldatadiy.com and buy you vehicle info for under 20 bucks for a year. That will give you all the wire diagrams you need. You will be looking for the vehicle speed sensor signal wire . ( VSS). I would look at the pin out connector of the computer and it will be there. Most of these have 3 wires,one power 5V, and one ground and the other is the signal. Goodluck and let me know if this helps. If you need more info I will be happy to answer any questions you have.Thanks....Dan

Posted on Jul 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the speed sensor located on a 2008 Nissan


On most Nissan models the Vehicle Speed Sensor (VSS) is installed in the transaxle, ...

Oct 16, 2014 | 2008 Nissan Rogue

1 Answer

Where is the vss wire located on a 2006 prius


violet wire on 26 pin connector to the multi display

Oct 06, 2014 | 2006 Toyota Prius

1 Answer

Got the P0500 CEL code. Already replaced VSS, single-rev sensor and even tried replacing cluster unit. All with no solution. Symptom: Speedometer stays at 0 at first. Engine does not shift to 3rd gear


NO NO NO the VSS sensor has three wires 5 volt reference signal return and ground easy test is to check v-ref and ground. signal return must be tested by using ohm meter checking from computer plug to sensor one of the wires has open circuit this sensor is used to control transmission shifting also can you judge your speed better than the cops radar.

Nov 07, 2013 | 2008 Toyota Yaris

1 Answer

What color is the VSS wiring in a 2008 uplander ls????


It is located on the outside of the transmission under the hood

Mar 02, 2013 | Nissan Versa Cars & Trucks

1 Answer

1992 camaro, E-code (305tbi)- speedo inoperative,-gives code 24 no vss signal..-new vss installed, continuity good from vss to bulkhead connector and through to harness inside. there is supposed to be a...


Hi, I'm not familiar with the part, but the diagram shows it behind the glove box next to the ECM. Go in thru the bottom--remove the sound barrier, remove the EMC, then remove the buffer. What I recommend is to see if you can get one at a salvage yard. Otherwise, they are about $50 on eBay. Thanks for using FixYa.


jturcotte_1214.gifjturcotte_337.jpg

Mar 11, 2011 | 1992 Chevrolet Camaro

1 Answer

1997 honda accord se need to change vss,where


For 1997 Honda Accord 2.2L MFI 4cyl the Vehicle Speed Sensor - Location is located mounted on transmission.

OPERATION
The Vehicle Speed Sensor (VSS) is a magnetic pick-up sensor that sends a signal to the Powertrain Control Module (PCM) and the speedometer. The sensor measures the rotation of the output shaft on the transaxle and sends an AC voltage signal to the PCM that determines the corresponding vehicle speed.



TESTING
  1. Disconnect the negative battery cable.
  2. Disengage the wiring harness connector from the VSS.
  3. Using a Digital Volt-Ohmmeter (DVOM), measure the resistance (ohmmeter function) between the sensor terminals. If the resistance is 190-250 ohms, the sensor is okay.
REMOVAL & INSTALLATION
  1. Disconnect the negative battery cable.
  2. Disconnect the three terminal connector from the vehicle speed sensor (VSS).
  3. Remove the fasteners that secure the VSS to the transaxle housing assembly.
  4. Remove the VSS.
To install:
  1. Install the VSS.
  2. Install the mounting bolts.
  3. Connect the three terminal connector to the sensor.
  4. Connect the negative battery cable.
Hope helps (remember rated this).

Jul 16, 2010 | 1997 Honda Accord

2 Answers

I have a 2006 lincoln mark lt that has a check engine code VSS


It's possible, was the light out before the audio tec worked on it, if so go back to the guy and ask him if he may have moved a connector or something when working on the stereo. don't go in and accuse him be nice and he will most likely have you fixed in no time.

Jul 25, 2009 | 2006 Lincoln Mark LT

1 Answer

VSS color of wires


There are a twisted pair of Yellow and Purple wires in the BIG harness by the left side airbox, you need to open the loom and hunt for them

May 16, 2009 | 2008 Chevrolet Impala

2 Answers

2006 Chevy express van. Attempting to install a


try bulldog.com they have alot of wiring diagrams

Apr 04, 2009 | 2006 Chevrolet Express

1 Answer

Where is the VSS (vehicle speed sensor)? OBD gives me #24


Hello! On 94 and earlier models it is located behind the glove box or close to the ECM. Cheers! Ryan

Feb 26, 2009 | 1989 GMC Suburban

Not finding what you are looking for?
Cars & Trucks Logo

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...