Question about 2003 Hyundai Tiburon

1 Answer

Replacing rear breaks - 2003 Hyundai Tiburon

Posted by on

  • dedros Sep 04, 2008

    I have a 2005 tiburon, and I cannot depress the caliper to allow for the break assembly to be remounted on the rotter. How do you depress that thing?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The caliper screws in with a special tool

Posted on Jan 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 ford f250 xlt rear breakes locking up


I would suspect you have a problem with ABS control valve if you are sure grease from the rear diff isn't getting on the shoes.

Jun 17, 2012 | 1993 Ford F250

1 Answer

I havea 1990 cadillac sedan deville my break pedal


check the master cylinder. It may need to be replaced.. When replacing, make sure to bench bleed it as not doing so would void the warranty.

Mar 07, 2010 | 1990 Cadillac Deville

1 Answer

How do i pull off the lens for rear break bulb to replace the blinker and the break bulb?


Open the rear gate. There are a couple screws you need to take out to remove the whole lamp assembly. Pull the bulbs out and replace then replace the lamp and put screws back in.

Nov 09, 2009 | 2008 Hummer H3

1 Answer

Replace rear break light


remove screws holding taillamp pop out lamp and remove bulb. good luck.

Oct 25, 2009 | 2005 Chevrolet Equinox

1 Answer

Since replacing rear pads, only both rear breaks are on, slightly truck will not roll freely wasupppppppp with that


If I am correct that truck has rear drum breaks? If this is the case the adjusters sound as if they were not brought in enough for proper clearance between the drums and shoes. If this is it I'd remove the rear drums and adjust for proper clearance (there should be no drag with drum breaks. If they are disk breaks I'd say the calipers are stuck and keeping tight on the discs; if this is the case I'd replace that calipers with new or rebuilt units.
I hope this may have helped,
Tom

Sep 07, 2009 | 1989 Chevrolet S-10 Blazer

1 Answer

How do I replace the break light in the rear


You'll have to go into your trunk and there should be two screws holding the light fixture in place.. remove the screws and you'll be able to replace the bulbs

Aug 21, 2009 | 1993 Geo Prizm

2 Answers

1994 Jimmy - Rear brakes are dominating after brake job


You need to bleed the whole system. Once this is done it should work better. Make sure you are not low on brake fluid. If the front brakes are disk brakes and the rear are drum breaks, the front really does most of the stopping, the back jjust keeps the car from spinning or swaying. But the main stopping power is in the front breaks. They need to be bled correctly, make sure brake fluid is up and make sure emergency break is not engaged. The emergency break uses a lever and cable to activate the rear brakes. The emergency breaks don't run off brake fluid...

please give good ratings, they are very important...

Aug 07, 2009 | 2000 GMC Jimmy

1 Answer

I am not getting any break fluid to one of my rear break calipers when trying to bleed them after replacing the caliper


check the bleeder valve on the caliper. A lot of times those come bad brand new or clogged.

Apr 22, 2009 | 1993 Mazda 626

1 Answer

REAR BREAK PADS NOISY


hello , it seems that you need a new break pads , and if you an form that showing that the breaks were checked , so the dealer is responsible for changing it , i hope i helped you , and thank you for using fixya.

Jun 26, 2008 | 2005 Volkswagen Jetta

Not finding what you are looking for?
2003 Hyundai Tiburon Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...