1995 thru 2001 is located in the jack storage compartment in the rear of your Explorer. First remove the panel to the jack storage compartment. Towards the front of this area you should see a metal box this is your auto-lock module(way up front next to your rear left passenger seat). On the back side of this is your 5 digit code factory preset code. It is hard to get to. To see it you will have to loosen, pull, use a flashlight or a mirror but it can be done.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may have to go to a Ford dealership and provide them with the Vehicle Identification Number (VIN) so they can pull up the factory specs on that particular Explorer. They'd probably be your best bet.
Contact the dealer for this information. they can help. Contact the person whom you bought the car from they should also be able to help. I can't give this type of information out over the web without knowing any more about your situation.
on my 2005 eddie bauer it was behind the back seat on the side panel between two windows. you have to take off the inside molding and there's a number printed 5 digit i think...i think it was right side.