Question about 1992 Buick Roadmaster

1 Answer

Turn signals my turn signals dont blink but the lights work

Posted by on

1 Answer

The flasher may be bad. You also might want to check the fuses.

Posted on Aug 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Did that seems like the turn signal works everything the fog lights blink with right turn signal on


you haven't said what your vehicle is , usually when this type of thing happens it is a faulty earth connection at the turn signal bulb fitting, this is easy to check , remove the bulbs and turn the turn signal on and see if the fog lights still blink, if they dont then is a problem with the earth at the bulb holder , check for the condition of the earth wire and its connection to the body, hope this helps

Jun 25, 2016 | Cars & Trucks

2 Answers

My turn signals dont work, the emergency lights work, and the brake lights work, whats the problem?


The device that flashes the lights is not working or that same device is not receiving power.

May 24, 2016 | Cars & Trucks

1 Answer

My brake lights and turn signals are not working


I might be a switch regulator on your steering colum.

Aug 14, 2012 | 1998 Lincoln Town Car

2 Answers

Brake light/turn sigs dont work.But lights are on?


Ok, GM had a problem with their hazard light switches in the years of around 2001-2005. These caused some bizarre workings concerning the hazards, lights, turn signals, etc. The circuits overlap, and when the switch malfunctions, it makes for some odd happenings. Normally, when the hazards are on, they cancel out the brake lights and the turn signals, since they use the same circuits. The normal taillights use a different filament in the same bulb, which is why they light up brighter when you press the brakes. The aftermarket has come up with replacement switches in response to these inherent problems, so do not get your switch from GM. Places like RockAuto.com will sell these, though not necessarily this place, it's just the one I use. Usually, GM put these in the steering column, so replacement can be tricky for the average person, as it involves taking apart some of the steering column.

Feb 22, 2010 | 2004 Pontiac Grand Prix

1 Answer

My turn signal lights dont work. They turn on they


i case you are unaware their are 2 flaher units on this truck one for ts swith and one for the 4 ways

Nov 21, 2009 | 1978 Chevrolet C1500

1 Answer

My turn signals dont work properly


Does the dimmer switch work properly? If yes, have you replaced BOTH flasher relays? if yes, then it sounds like you have a short in your wiring harness. You're going to have to chase the connectors with a multimeter. It's tedious but rewarding work. Best of luck!

Oct 15, 2009 | 1990 Dodge Shadow

2 Answers

REAR TURN SIGNALS WORK BUT MY BRAKE LIGHTS DONT


Replace the turn signal switch. If you want to prove this have someone stand behind the car with your foot on the brake. Then wiggle the turn signal lever. The brake lights should blink. This is a real common problem with W body. I have replaced two on my cutlass plus tons more at my shop.

Jun 15, 2009 | 1997 Chevrolet Lumina

3 Answers

Turning signals dont blink


Problem is the Turn Signal "FLASHER" unit, 1.Turn on Emergency FLASHERS 2. Go under Dash while they are on Listen -for Clicking sound then feel for it 3. Should Be a Silver Round Unit About as Big IN ROUND as Half dollar coin 4. ok now Look Around for the SAME EXACT Thing Clipped onto Something Under dash At Driver side Usually Between Steering wheel and Center HUMP in Floor, 5. once you find it Take OUT the first One you Found Emergency FLASHER) and 6. Put it In Place of Turn Signal Flasher, 7. Turn off Emergency Flashers- Turn Key in "ON" Position but don't start then Try Turn Signals. Yaaaa !!!! they work ?? LoL hopefully this Does the trick, if they work Buy new one and Replace Always Use NEW For TURN Signals as they are used Much More than Emergency Flashers. Hope this is Good Instructions For you and Helps you Solve The Problem, Please DONT Forget to RATE ME Thank you Rejakwilson@aol.com

Jan 18, 2009 | 1986 Oldsmobile Cutlass Supreme

1 Answer

Signal lights not working


You either have two bad bulbs or the fuse for the turn signals is blown out.

Dec 29, 2008 | 2001 Dodge Ram 1500 Truck 2WD

Not finding what you are looking for?
1992 Buick Roadmaster Logo

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...