Question about 1984 Ford F 150

1 Answer

Brake lights My tailights work, turn signals work on both sides, but my driver's side brake light only works when the ignition is off. When the ignition is on the brake light portion of the bulb comes on. I have no brake lights on the passenger's side at all.

Posted by on

  • Anonymous Mar 22, 2014

    THE DRIVERS SIDE TAILIGHT DOES NOT WORK PROPERLY

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 60 Answers

If all of the wiring, fuses, bulbs, and switches are good (which is what it seems since everything else works fine including the turn signals on the passenger taillight), sounds like it may just be a bad socket. I have a somewhat similar problem on a 1986 F150.

Posted on Jul 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the fuse located for left brake light on fuse box


Brakes are generally not fused seperately. Have u check the bulb in the left side.

Sep 15, 2014 | Cars & Trucks

2 Answers

ELECTRICAL PROBLEM


take it to a body shop

Nov 27, 2013 | 2000 Dodge Stratus

1 Answer

2002chevy s-10 third brake light works but not the tailights


you have 2 elements in the bulb. One for turn signal and lights, the other for the brakes. You have a bad bulb that needs to be replaced.

Feb 01, 2013 | Chevrolet Cars & Trucks

1 Answer

I have a 2002 Chevy Express van. All of the tail lights work except the driver side. Left signal light and backup light works fine. Problem: The driver side brake light works as long as the running...


The printed circuit board that the bulbs push into needs replacement. Any autoparts store will have it. It just screws into tailight assembly & attaches to wiring harness.

Nov 01, 2010 | 2002 Chevrolet Express

1 Answer

Well for the camper there are for wires for the lights i have green wire that is the right turn signal and hooked it up on the right side to the green wire which is the right turn signal in the car then...


well, the following is the generic (standard) wiring for trailer plugs......

tail (clearance) = brown
left hand turn = yellow
right hand turn = green
stop (brake) = red
electric brakes = blue
earth = white

now, you said that you had connected green, yellow and brown, and white. which is all well and good, but you did not mention a red wire which would be for the brake lights.

I hope this helps, get back to me with more info to assist you.

Please vote if you liked this response. !!!!!!!!!

Jun 27, 2010 | Chevrolet Cobalt Cars & Trucks

2 Answers

Tail lights work on both sides. turn signal and


Sounds like you need to replace the drivers brake/tail light.

Dec 14, 2009 | 1998 GMC Sierra

1 Answer

Only one tailight works. replaced bulb. brake lights work turn signals work driver side tailight works no tailight on passenger side.


i think you'll find with a test light at the tail light connector,that the you do have power but the problem is the unit that holds the bulbs and is a printed circuit is bad

Dec 07, 2009 | 2000 Chevrolet Silverado

1 Answer

Can't figure out why no power is getting to the right side brake light and turn signal. The other lights work on the tailight. I checked the fuses. brake light switch, and checked the wires for damge.


your wiring may have gotten pinched by crossmember or something else.i would check for power out of the fuse block.there are four wires on the right side coming out of your fuse box with a seperate flat vertical plug,the colors are brown,dark green,yellow and light green.brown is tailight,light green for your backup lights and green and yellow for left and right stoplight/turn signals.use a test light at the plug.

Mar 28, 2009 | 1985 GMC K1500

1 Answer

1992 Dodge Dakota LH tailight problem


Have you taken bulb out & cleaned terminals inside socket & either cleaned bulb base & terminals, or tried replacing bulb?

Mar 10, 2009 | 1992 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...