Question about 1995 Kia Sportage

1 Answer

I can't get the timing marks to line up - 1995 Kia Sportage

Posted by on

  • connieloris5 Nov 14, 2008

    2001 kia sportage cant find correct timing mark position

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kia Master
  • 1,757 Answers

Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams for use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1995/make/kia/model/sportage/1995_kia_sportage_timing_belt_diagram_marks.htm

Posted on Mar 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Timing marks 1993


spark or cam ?????????????????
and which engine, some cars have up to 10 choices.
most are about 3 or 4.
not of this can i guess.

May 29, 2014 | 1993 Pontiac Grand Prix

3 Answers

I was driving on hwy., car died suddenly, so I towed it to my house. I found out timing belt had jumped several teeth. I put new belt on, put it on marks, now my car starts and dies immediatley unle


If the belt keeps jumping, I would say you have a badly worn sprocket or the belt tensioner needs checking, it may need a new tensioner or your procedure for tightening it needs to be checked.
If no mark for the idler, then just put it at the 4 o'clock position, as you are facing it.

Jan 22, 2013 | 1982 Volvo 240 Series

2 Answers

Hi! What are the correct timing marks for a 1.8 suzuki esteem engine. I needed for change the timing chain. Thanks


if you take off the upper belt cover and line up the top dead center timing mark the cam mark will be right on or off 180 degrees. Line up the dot on the cam with the arrow by rotating the crankshaft around till both the cam mark and the crank TDC mark line up. Now when you take off the lower cover all the marks will line up for the crank. They are usually pretty obvious, but if your are not sure at this point you can always paint your own. Just make sure when you slide the new belt on , all the timing marks line up.

Dec 28, 2010 | 2001 Suzuki Esteem

2 Answers

Okay. I got the old timing belt out and found that all the teeth were gone where it goes around the crankshaft gear. I put a new timing belt on and lined up the marks, but when I rotate the engine several...


the marks on the belt itself will not line up with gear marks after rotating engine as long as engine marks line up you are fine however these are know to bend valves

Aug 21, 2010 | 1991 Nissan Pathfinder

1 Answer

Replacing a timming belt where are the marks suspost to line up


You didn't get the timing marks lined up between the cam and the valves. You are going to have to open it back up and line the marks back up correctly. Make sure you get the Number 1 cylinder lined up to Top Dead Center on the compression stroke and have the valves lined up correctly then line the timing marks up on the timing gears.

Jun 24, 2010 | 1992 Mitsubishi 3000GT

3 Answers

Timing belt broke and need timing marks diagram 2.2 subaru


the timing marks are on the camshaft pulleys and there are 2 notches on each pulley> they line up with 2 marks on the engine block for each pulley> and the crankshaft has a notch that lines up with a mark on the engine block aswell> pluss the new timing belt will have white marks on it that will line up with all of the marks on the pulleys when they are in the right place so its nearly impossable to do it wrong

Apr 07, 2010 | 1997 Subaru Legacy

1 Answer

Need to know how to line the timing marks on the 1.7 ltr. sohc on my 2004 honda civic ex, has timing belt


there is a timing mark on the timing cover that lines up with the mark on the crank pulley (i believe the mark is above the white dot on the crank) then on the 2 gears up top, there are lines that should line up horizontally with the top of the timing cover.

Mar 20, 2010 | 2004 Honda Civic

1 Answer

I am putting a new timing belt on a 1990 colt vista with a 2.0 liter engine.I need to know the timing mark positions.


On cam gear there's a punch mark, line that mark at 9 oclock there's a timing mark on cylinder head, crank gear, in back of crank gear is a plate with a (v) cut line gear at 11 oclock there's a timing mark on front case, gear to right of crank gear has a (v) cut on it, line it at about 11 oclock at timing mark on front case, adj tensioner and your done.Good Luck.

Dec 12, 2009 | 1990 Dodge Colt Vista

1 Answer

Camshaft timing mark crankshaft timing mark


Belt covers need to be on. Timing mark on crankshaft (while on compression stroke) should line up with TDC mark on cover. then Camshaft mark, needs to line up by looking through access hole of cover, and align mark on cam sprocket with pointer on inside of belt cover.

Oct 22, 2009 | 1987 Ford Ranger

2 Answers

TIMING BELT MARKS DONT MATCH AFTER ENGINE TURNED OVER


dont worry about that you will have to turn the motor over 40 to 50 time before those timing belt marks line up again if your pulley marks line up correctly thats all you have to worry about

May 29, 2009 | 1994 Toyota Land Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...