rpms are dropping to 0 stalling sometimes. doesnt happen all the time and doesnt matter if its warm...
(More)
rpms are dropping to 0 stalling sometimes. doesnt happen all the time and doesnt matter if its warm or cold
Ford Windstar 2001. I got the door ajar light to go out (Rear Hatch latches needed WD40) and...
(More)
Ford Windstar 2001. I got the door ajar light to go out (Rear Hatch latches needed WD40) and interior lights to come on, now the lock on driver door won't work right and the anti theft alarm won't arm anymore. Only get one chirp instead of two chirps when I press the button on my fob. Armed fine before I applied the WD40. Help!!
3L V6 - replaced the front oil seal, timing belt etc. After re-assemble per the Haynes repair, I...
(More)
3L V6 - replaced the front oil seal, timing belt etc. After re-assemble per the Haynes repair, I continue to have what sounds like timing belt rubbing on pulleys or covers. disassembled to check correct timing, tentioner setting and deflection on the belt. Still have belt noise when test run. Checked with a straight edge along the front faces of the belt spockets to make sure tensioner is running true with the cam & crank sprockets. Have test run without timing belt cover & dampener to try & isolate were the belt noise is coming from. Any ideas or tips would be appreciated. Are there part(s) that should be replaced when doing this service? IE: tensioner bearing.